Skip to content
MT5MT4soonTradingViewsooncTradersoonNinjaTradersoonPythonsoon

Base and Quote Currency in FX: How to Read Any Currency Pair

beginner8 min readNov 14, 20260 views
Learn Forex from zero · lesson 42 of 130 · chapter 1

In any forex pair, the first currency is the base currency and the second is the quote currency. The price tells you how many units of the quote currency it takes to buy one unit of the base. At EUR/USD 1.20, one euro costs 1.20 US dollars. When you buy the pair, you buy the base currency and sell the quote currency.

This matters for your money. If you mix the two up, you can open a trade in the opposite direction to your view, or misjudge what a profit is worth in your account. Both mistakes are easy to prevent once you know how a pair is read.

How to tell the base currency from the quote currency

Every currency pair is written as two three-letter codes, such as EUR/USD or USD/JPY. The codes follow the ISO 4217 standard, so EUR always means the euro and USD always means the US dollar, whichever broker or news site you use.

The order tells you what each code does. The first code is the base currency, the one being priced. The second is the quote currency, the one the price is counted in. Some sources call them the transaction currency and the counter currency. The meaning is the same.

The picture below splits one quote into its parts.

Parts of a EUR/USD quote: base currency, quote currency and price
The base is always one unit. The price counts how much of the quote currency that one unit costs.

Many platforms leave out the slash and show EURUSD. The rule stays the same: the first three letters are the base and the last three are the quote.

What the price number tells you about each currency

The price always means "this much quote currency for one unit of the base". The base stays fixed at one unit. Only the amount of quote currency changes.

That gives you a simple reading rule:

  • Price rises: one unit of the base buys more of the quote. The base got stronger and the quote got weaker.
  • Price falls: one unit of the base buys less of the quote. The base got weaker and the quote got stronger.

Say EUR/USD moves from 1.20 to 1.25. A euro now costs 1.25 dollars instead of 1.20, so the euro strengthened and the dollar weakened. It's one move seen from both sides.

One EUR/USD move from 1.20 to 1.25 seen from the euro side and the dollar side
It is one price move. The euro buys more dollars, so each dollar buys fewer euros (1 ÷ 1.20 ≈ 0.8333 before, 1 ÷ 1.25 = 0.80 after).

You can flip any pair by dividing 1 by the price. If EUR/USD is 1.20, one dollar costs 1 ÷ 1.20 ≈ 0.8333 euros. It's the same exchange rate written the other way round. This helps when a headline talks about the currency that sits second in your pair.

What you actually do when you buy or sell a pair

A forex trade is always two trades in one. You never just "buy euros". You buy one currency and pay for it with the other.

When you buy EUR/USD (going long), you buy EUR and sell USD, and you want the euro to rise against the dollar. When you sell EUR/USD (going short), you sell EUR and buy USD, and you want the euro to weaken against the dollar. The comparison below shows both sides.

Buying vs selling EUR/USD: what happens to each currency
Buy EUR/USD (long)
  • –You buy euros (the base)
  • –You sell dollars (the quote)
  • –You want the price to rise
  • –Gains if EUR strengthens vs USD
Sell EUR/USD (short)
  • –You sell euros (the base)
  • –You buy dollars (the quote)
  • –You want the price to fall
  • –Gains if EUR weakens vs USD

Selling trips up many beginners. You don't need to own euros to sell EUR/USD. Your broker handles the exchange. You just hold a position that gains when the price falls.

Turn a view on one currency into the right order

Most trade ideas start with one currency, for example "I think the dollar will strengthen". Which order you need depends on where that currency sits in the pair.

Use this decision rule every time:

  • If the currency you expect to rise is the base, buy the pair.
  • If the currency you expect to rise is the quote, sell the pair.
  • If you expect a currency to fall, do the opposite.

Here is the rule applied to one view, "the US dollar will strengthen":

PairBaseQuoteWhere USD sitsOrder for "USD up"
EUR/USDEURUSDQuoteSell
GBP/USDGBPUSDQuoteSell
USD/JPYUSDJPYBaseBuy
USD/CADUSDCADBaseBuy

The same view gives a sell on two pairs and a buy on the other two. Checking where the currency sits before you click is the whole job.

Bid and ask are both prices for one unit of the base

Your platform shows two prices for every pair. The bid price is what you receive when you sell one unit of the base currency. The ask price is what you pay to buy one unit of it. The bid is normally lower than the ask, and the gap between them is the bid-ask spread.

Both numbers are counted in the quote currency. For example, suppose EUR/USD shows a bid of 1.2812 and an ask of 1.2815. Buying one euro costs 1.2815 dollars. Selling one euro gets you 1.2812 dollars. The chart below shows those two prices.

EUR/USD bid and ask: both are prices in dollars for one euroIllustration
Spread 0.0003 USDAsk (you buy 1 EUR)1.2815Bid (you sell 1 EUR)1.2812

In this example the spread is 1.2815 − 1.2812 = 0.0003 dollars per euro, or 3 pips. A pip is the 4th decimal on most pairs (0.0001) and the 2nd decimal on yen pairs (0.01). Yen pairs use fewer decimals because the quote currency is the yen. One yen is a much smaller unit than a dollar or a euro, so the price is a much larger number. A buy opens at the ask and closes at the bid, and a sell does the reverse. So every trade starts slightly negative by the spread, and that cost is counted in the quote currency.

Worked example: your profit lands in the quote currency

Many explanations leave this part out. Profit or loss on a pair is worked out in the quote currency first. Only after that is it converted into your account currency.

The figures here are an illustrative example. The move is large so the arithmetic stays clean, and the spread is ignored to keep it simple.

  1. You buy 10,000 euros of EUR/USD at 1.2000.
  2. Cost in the quote currency: 10,000 × 1.2000 = 12,000 dollars.
  3. Later the price is 1.2500 and you close. The position is now worth 10,000 × 1.2500 = 12,500 dollars.
  4. Profit: 12,500 − 12,000 = 500 dollars. It comes out in dollars because the dollar is the quote currency.
  5. If your account is in euros, the platform converts it: 500 ÷ 1.2500 = 400 euros.
Profit on a EUR/USD buy from 1.2000 to 1.2500, in dollars and in euros
Cost of 10,000 EUR at entry10,000 × 1.2000= $12,000
Value of 10,000 EUR at exit10,000 × 1.2500= $12,500
Profit in the quote currency$12,500 − $12,000= $500
Converted for a euro account500 ÷ 1.2500= €400
Result+$500 (= €400)

If you had sold the same 10,000 euros at 1.2000 instead, the same move would have cost you 500 dollars. The size of the result is the same either way. Your order direction decides whether you gain or lose it.

The same logic works for every pair. On USD/JPY, results come out in yen. On a cross currency pair such as EUR/GBP, they come out in pounds, even with no dollar involved. If your account currency is neither one, a conversion is added on top. That's why your account result can differ slightly from the pips you counted: the conversion rate moves too.

Pip value is counted in the quote currency too

One pip is worth a fixed amount of the quote currency, not of your account currency. To find it, multiply your position size by the size of one pip. The position sizes below are an illustrative example.

PairPosition sizeSize of one pipPip value in the quote currencyValue for a dollar account
EUR/USD10,000 EUR0.000110,000 × 0.0001 = $1$1, no conversion needed
USD/JPY10,000 USD0.0110,000 × 0.01 = ¥100¥100 ÷ the current USD/JPY price

On EUR/USD the dollar is the quote currency, so a dollar account gets $1 per pip with no extra step. On USD/JPY each pip is worth 100 yen. A dollar account divides that 100 yen by the USD/JPY price to get the dollar value. Do this step when you size a trade, before you set a stop.

Check your total exposure to each currency before adding a trade

Doubling a bet without noticing. Suppose you sell USD/JPY and buy EUR/USD. They look like two separate trades, but both are short the dollar, so a dollar rally hits both at once. To avoid it, write each open position as two parts (buy X, sell Y) and count how often each currency appears on each side.

Two-part check: selling USD/JPY and buying EUR/USD are both short the US dollar
Write each position as buy X, sell Y. USD shows up twice on the sell side, so this is one dollar bet made twice, not two separate trades.

Cancelling your own trade. The reverse happens too. Buying EUR/USD (short USD) and buying USD/CHF (long USD) partly cancels your dollar exposure, so the two positions work against each other whenever the dollar moves. To avoid it, do the same two-part check before you add a position.

FAQ

How do I know which currency is the base when the symbol has no slash?

The first three letters are the base and the next three are the quote, so EURUSD has EUR as the base and USD as the quote. Some brokers add extra letters to the symbol for their own account types. Read only the six-letter currency part.

Can I trade USD/EUR instead of EUR/USD?

Most platforms list each pair in only one order, set by market convention. You don't lose anything by this. Selling EUR/USD gives you the same position that buying USD/EUR would: long the dollar and short the euro.

Why does my finance textbook write currency pairs in a different order?

Some finance textbooks and exam curricula use a notation that puts the currency the price is counted in first, which is the reverse of how trading platforms show pairs. Before you use a formula from any source, check how it defines its notation. On a trading screen, the first currency is the base.

Does it matter whether my account currency is the base or the quote?

It changes how your result is converted, not whether the trade wins or loses. If your account currency is the quote, such as a dollar account trading EUR/USD, profit arrives with no conversion. If it's the base or neither currency, the platform converts at the current rate, so the account value of each pip shifts a little as rates move.

Part of Forex basics: more guides, terms and free tools on this subject.