Skip to content
MT5MT4soonTradingViewsooncTradersoonNinjaTradersoonPythonsoon

How to Trade Forex Pairs: A Beginner's Step-by-Step Lesson

beginner12 min readNov 17, 20260 views
Learn Forex from zero · lesson 63 of 130 · chapter 1

To trade a forex pair, you choose a pair such as EUR/USD. Then you decide whether the first currency will strengthen or weaken against the second, and you buy or sell. Before you click, set a stop loss, a target and a trade size small enough that the stop costs only a small slice of your account. Your result is the pips the price moves times the value of each pip.

Each of those steps protects real money. Skip one, such as trading with no stop or picking a size by feel, and a single bad move can take a large part of your deposit.

Read the pair: which currency you are buying

Forex is the market where currencies trade against each other. Every trade involves two currencies at once, so prices come as a currency pair, written BASE/QUOTE.

The first currency is the base currency and the second is the quote currency. The price is how much of the quote currency you need to buy one unit of the base. Say EUR/USD is at 1.1000. That means one euro costs 1.1000 US dollars.

The picture below labels each part of that quote and shows what each trade direction means.

Anatomy of a EUR/USD quote: base, quote, pip digit and trade direction
Buying or selling is always about the base currency measured against the quote currency.

Going long (buying) EUR/USD means you expect the euro to strengthen against the dollar. Going short (selling) means you expect the euro to weaken against it. You do not need to own euros to sell. You are trading the change in price, and you close the trade by doing the opposite.

A common misread: a falling EUR/USD does not prove the euro is weak in general. It only shows the euro losing ground against the dollar. That could just as well be the dollar getting stronger, and the pair alone cannot tell you which.

Two prices on every pair: bid, ask and the spread

Your platform always shows two prices. The bid is the highest price a buyer will pay, and sell trades open at the bid. The ask is the lowest price a seller will accept, and buy trades open at the ask.

The gap between the two is the bid-ask spread. It includes the broker's markup, and some brokers charge a commission on top. On a commission-free account, the spread is your main trading cost.

Say EUR/USD shows a bid of 1.09992 and an ask of 1.10000, a spread of 0.8 pip. The ladder below shows which price each order fills at.

EUR/USD example quote: bid 1.09992, ask 1.10000, spread 0.8 pipIllustration
Spread 0.8 pipAsk (buy orders fill here)1.10000Bid (sell orders fill here)1.09992

A buy opens at the ask and closes at the bid. A sell does the reverse. So every new trade starts slightly in the red, and the price has to move by the spread before you break even.

The spread is not fixed. It can widen during high-impact news, quiet low-liquidity hours, the daily rollover, and around the market open and close. A simple rule: if the spread on your pair is clearly wider than usual, wait or skip the trade.

Add up the full cost, not just the spread on screen. That means spread, commission, slippage (a fill worse than the price you clicked) and overnight financing.

Pips and lots: how a price move turns into money

A pip is the standard unit of price movement. On most pairs it is the fourth decimal place, 0.0001. On yen-quoted pairs such as USD/JPY it is the second decimal place, 0.01. Many brokers also show a fifth decimal, which is a tenth of a pip. The first four decimals carry most of the meaning.

Trade size is measured in lots, which are blocks of the base currency.

SizeLotsUnits of base currencyValue of 1 pip on a USD-quoted pair
Standard lot1.00100,000about $10
Mini lot0.1010,000about $1
Micro lot0.011,000about $0.10

You can work out pip value yourself: units × pip size. For a mini lot of EUR/USD, 10,000 × 0.0001 = 1 unit of the quote currency, which is $1.

The important words are quote currency. The pip value is always paid in the quote currency first. On USD/CAD it comes in Canadian dollars: 0.5 lot is about C$5 per pip, which came to roughly $3.66 at one example exchange rate. On a yen pair the same formula gives yen: 10,000 × 0.01 = ¥100 per pip on a mini lot. If your account is in dollars, convert at the current rate. Don't assume every pair pays $10 per lot.

Pip value is paid in the quote currency: EUR/USD, USD/CAD and USD/JPY compared
The formula is the same for every pair, but the answer comes in the quote currency. Only the EUR/USD card is already in dollars.

Leverage and margin: the deposit is not your risk

Leverage lets you control a large position with a small deposit. That deposit is the margin. At 50:1 leverage on major pairs, the margin is about 2% of the position value.

Leverage does not change what a pip is worth. A 0.10-lot EUR/USD position pays about $1 per pip at any leverage. Leverage only changes how much cash the broker sets aside while the trade is open. The numbers in the picture below come from the worked example later in this lesson.

Leverage changes the margin, not the pip value: a 0.10-lot EUR/USD position at 1.1000
The margin is only a thin slice of the position. Your gain or loss per pip comes from the full $11,000 position, at $1 per pip.

The danger is that a small margin makes it easy to open a position far too big for your account. Gains and losses grow with position size, not with the margin. If your equity (balance plus the profit or loss on open trades) falls below the required margin, you can get a margin call, and positions can be closed. With leveraged forex and CFDs, you can lose more than your deposit.

The rule follows from this: size every trade from your stop loss, never from how much margin you have free.

Which forex pairs to trade first

Liquid pairs, usually the majors such as EUR/USD, have many traders and typically tighter spreads. Illiquid pairs, often exotic currency pairs from emerging markets, can jump suddenly because one large order can move the price. Majors can still move sharply around events such as interest rate decisions.

Beginners often start with EUR/USD, USD/JPY and GBP/USD. Pick one or two and learn how they behave at different times of day, instead of scanning dozens. A cross currency pair has no US dollar in it, such as EUR/GBP. If your account is in dollars, its pip value always needs a conversion.

Decide the direction: one beginner rule

Before any of the steps below, you need a reason to buy or sell. A simple rule for beginners is to trade only in the direction of the daily chart.

  • If the daily chart makes higher highs and higher lows, only look for buys.
  • If it makes lower highs and lower lows, only look for sells.
  • If it does neither and the highs and lows overlap, leave that pair alone for now.
Illustrative daily chart: a choppy range, then an uptrend with higher highs and higher lowsIllustration
Choppy rangeSwing high 1Swing low 1Higher highHigher low
Illustrative prices only. On the left, the highs and lows overlap, so you leave the pair alone. On the right, each swing high and each swing low is above the one before, so you only look for buys.

The rule does not tell you when to enter. It removes half of your choices, so you do not buy into a falling market or sell into a rising one. Look at the last few swing highs and lows on the daily chart and write down which of the three cases you see. That sentence is your reason in step 1.

How to place a forex trade, step by step

You need an account with a broker to place trades. Run these steps on a demo account first, which uses live prices and virtual money, before you trade real money.

  1. Pick the pair and write down your reason. One sentence: why you expect the base currency to rise or fall against the quote.
  2. Check the spread against what you normally see on that pair. If it is unusually wide, wait.
  3. Set the stop loss. A stop loss is an order that closes the trade automatically at a price you choose. Put it where your idea would be proven wrong, not at a round number of dollars.
  4. Size the position. Lots = money at risk ÷ (stop distance in pips × pip value per 1 lot).
  5. Set the take profit. A take profit closes the trade automatically at your target. Compare the distance to the target with the distance to your stop before you commit. In the worked example below, the target is 40 pips and the stop 20, so a win pays twice what a loss costs.
  6. Choose the order type. A market order fills now. A pending order waits for a price you set. The table below the steps shows the three kinds.
  7. Check the order window before sending: the pair, buy or sell, volume in lots, stop loss and take profit. Check that the stop loss and take profit fields hold your prices and are not empty.
  8. After the trade opens, leave the stop alone, unless you are moving it to cut risk.
Order window check before sending: EUR/USD buy, 0.10 lot, stop loss 1.0980, take profit 1.1040
Check every field before you send. An empty stop loss or take profit field means that order is not there at all.
Order typeWhere it sitsFills at
MarketNowhere: it fills right awayThe current ask (buy) or bid (sell)
Limit (buy limit / sell limit)Buy limit below the price, sell limit above it: waits for a pullbackYour price or better
Stop (buy stop / sell stop)Buy stop above the price, sell stop below it: waits for a breakoutYour price or worse
Where pending forex orders sit: buy and sell limits vs buy and sell stops relative to the current price
A buy limit sits below the price and a buy stop sits above it. Sell orders are the mirror image. A market order has no level at all.

Pending orders can usually stay open until you cancel them, until the end of today, or until a date you set.

Worked example: one EUR/USD trade with the maths shown

The figures in this example are illustrative. You have a $2,000 account and risk 1% per trade. You expect the euro to strengthen, so you buy EUR/USD at the ask of 1.1000. That is the 1.10000 from the same example quote above, written with four decimals: the same price. You put the stop at 1.0980, below a recent low, and the take profit at 1.1040.

Sizing the example EUR/USD buy from a 1% risk and a 20-pip stop
Money at risk (1% of account)$2,000 × 1%= $20
Stop distance in price1.1000 − 1.0980= 0.0020
Stop distance in pips0.0020 ÷ 0.0001= 20 pips
Lot size$20 ÷ (20 × $10)= 0.10 lots
Pip value at 0.10 lots100,000 × 0.10 × 0.0001= $1
Profit if take profit hits (40 pips)40 × $1= $40
OrderBuy 0.10 lots, risking $20

Now read the results. If the stop is hit, you lose 20 pips × $1 = $20, which is 1% of the account. If the take profit is hit, 1.1040 − 1.1000 = 0.0040, or 40 pips, so you make 40 × $1 = $40. The spread is already counted, because you bought at the ask and the stop and take profit close at the bid. Right after opening, the trade shows about −$0.80 (0.8 pip × $1).

The $220 of margin is not your risk. It is cash set aside while the trade is open. Your risk is the $20 set by the stop.

The path below shows one way the trade could play out. The price dips toward the stop but never reaches it, then climbs to the take profit.

EUR/USD example trade: buy at 1.1000, stop 1.0980, take profit 1.1040Illustration
Take profit 1.10401.1040Entry 1.10001.1000Stop loss 1.09801.0980Take profit hitBuy

Now compare a size picked from free margin. Say you bought 0.50 lot instead, because the account could cover its $1,100 margin (50,000 × 1.1000 × 2%). Each pip is now worth $5 (50,000 × 0.0001). The same 20-pip stop then costs 20 × $5 = $100, which is 5% of the account on one trade. Same chart, same stop, five times the damage.

Loss when the same 20-pip EUR/USD stop is hit: 0.10 lot sized from the stop vs 0.50 lot sized from free marginIllustration
0.10 lot, sized from the stop
$20 = 1% of account
0.50 lot, sized from free margin
$100 = 5% of account

Mistakes that cost beginners money, and how to avoid each

Trading without a stop, or moving it further away. The loss keeps growing until you close the trade or a margin call does, and it can exceed your deposit. Set the stop in the order window before you send the order, and only ever move it in the direction that reduces risk.

Starting with exotic pairs. Thin trading means bigger jumps and wider spreads, so the same stop costs more and can fill further from your price. Learn on a liquid major such as EUR/USD first.

Having no daily limit. After a few losses it is tempting to trade bigger to win the money back. Write a trading plan with a maximum loss per day, and stop for the day when you reach it. Practise your rules on a demo account before you use real money.

Not logging your trades. At the end of each day, write one line per trade, for example: EUR/USD | buy | 1.1000 | SL 1.0980 | TP 1.1040 | +$40 | plan followed: yes. Over time, the log shows whether your losses come from the idea or from breaking your own rules.

Trading through high-impact news without checking the calendar. A rate decision on either currency in your pair can move even a major sharply, and the spread can widen at the same moment, so your stop may close the trade at the next available price, worse than its level. Check the economic calendar for both currencies before you open a trade, and wait until the release has passed.

Revenge trading after a loss. After a loss, the urge is to open the next trade at once, often with no reason behind it. Take a break after every losing trade, and open the next one only when it passes the direction rule and every step above.

Adding to a losing position. Adding more as the price moves against you moves your average entry closer to the current price but raises your size, so the same stop now costs more than you planned. Never add to a loser. If the price reaches your stop, the idea was wrong, and the stop closes it.

Holding over the weekend without knowing the risks. You pay or receive financing for each rollover you hold through, and the market stays closed until the new week opens. The first price after the open can be far from the last one and jump straight past your stop. The stop then closes the trade at that worse price, so the loss is bigger than you planned, and with leverage a large gap can cost more than your deposit. Before the Friday close, check your financing and decide whether the trade is worth that gap risk. If it is not, close it.

FAQ

Do I need a licensed broker to trade forex pairs?

Yes. Use a provider authorised by the regulator where you live. Rules on who may trade which pairs, and through what kind of provider, are set by each country and differ widely. Before you open an account, check what your national financial regulator and currency rules allow residents to trade. The mechanics in this lesson are the same everywhere.

How small can my first real trade be?

Many brokers allow 0.01 lot, a micro lot of 1,000 units. On a USD-quoted pair that is about $0.10 per pip, so a 20-pip stop risks about 20 × $0.10 = $2.

What happens if I keep a trade open overnight?

A position held through the daily rollover usually pays or receives overnight financing. Whether it is a credit or a debit depends on the interest rates of the two currencies and on whether you bought or sold.

How should I use a demo account?

A demo account uses live prices and virtual money. Some come with large virtual balances, such as $20,000. Trade it as if it held the amount you actually plan to deposit, with the same 1% sizing, or the practice will not carry over to real money.

How much money do I need to start trading forex?

Minimum deposits differ by broker, so there is no single figure. A more useful question is how much one trade will risk. Illustrative example: a 0.01-lot trade with a 20-pip stop risks about $2, and that is 1% only on an account of about $200. With a smaller account, even the smallest trade risks more than 1%. Only deposit money you can afford to lose, because leveraged losses can be larger than the deposit.

Part of Forex basics: more guides, terms and free tools on this subject.