Skip to content
MT5MT4soonTradingViewsooncTradersoonNinjaTradersoonPythonsoon
Risk & money management

Position Size

Also called Lot size, Trade size, Position sizing, Volume

Position size is how many units or lots you buy or sell in one trade. You set it from the money you are willing to lose and the distance to your stop-loss, so a stop that gets hit costs a planned amount.

If you get position size wrong, a normal stop-loss can cost you several times what you planned. For example, 1 lot on a 20-pip stop risks $200, four times the $50 a $5,000 account would risk at 1%. If you get it right, every loss is a known, fixed slice of your account, whatever the market and however far away your stop sits.

The position size formula, step by step

You need three inputs: your account balance, the share of it you are willing to lose on this trade, and the distance from your entry to your stop-loss.

Risk money = Account balance × Risk %
Position size (lots) = Risk money ÷ (Stop distance in pips × Pip value per 1 lot)

A lot is a standard trade size. A standard lot is 100,000 units of the base currency, a mini lot is 10,000 and a micro lot is 1,000. On a pair quoted in US dollars, such as EUR/USD, one pip (a 0.0001 move) is worth $10 per standard lot, $1 per mini lot and $0.10 per micro lot.

That $10 assumes your account is in US dollars. If your account is in EUR or GBP, convert the $10 into your account currency before you use it in the formula.

The order matters. You place the stop where the chart proves your idea wrong, and only then do you calculate the size. Size is the one input you adjust. The stop is not.

EUR/USD buy setup with the stop placed past the swing low versus a stop placed inside normal candle noiseIllustration
Entry1.1008Stop inside noise (wrong)1.0997Stop past swing low (right)1.0942Swing lowBuyTight stop tagged
Illustrative values. Put the stop where the chart proves the idea wrong, past the swing low. A stop inside the candle noise gets tagged before the idea is tested. Once the stop is set, adjust the size to fit it.

Sizing a trade on 500, 5,000 and 50,000 USD accounts

Here is an illustrative example. You buy EUR/USD, you risk 1% of the account, and your stop sits 20 pips below your entry. One pip is worth $10 per standard lot.

  1. $500 account. Risk money = $5. Most platforms only accept steps of 0.01, so the size ends at 0.02 lots (2,000 units), not 0.025. See the figure below.
  2. $5,000 account. Risk money = $50. Lots = $50 ÷ $200 = 0.25 lots (25,000 units).
  3. $50,000 account. Risk money = $500. Lots = $500 ÷ $200 = 2.50 lots (250,000 units).

The figure below works through the smallest account, where the round-down step is the part traders most often get wrong.

Position size for a 500 USD account risking 1% with a 20-pip stop on EUR/USD, rounded down
Risk in money$500 × 1%= $5
Cost of the stop per 1 lot20 × $10= $200
Raw lots$5 ÷ $200= 0.025
Real risk after rounding down to 0.02 lots20 × $10 × 0.02= $4
Order size0.02 lots (2,000 units), $4 real

Now keep the $5,000 account and the $50 risk, but move the stop. A wider stop forces a smaller size, and a tighter stop allows a bigger one. The money you lose if the stop is hit stays at $50, as the chart below shows.

Lot size for a fixed 50 USD risk as the EUR/USD stop-loss widensIllustration
10-pip stop
0.50 lots
20-pip stop
0.25 lots
25-pip stop
0.20 lots
50-pip stop
0.10 lots

Quick-reference lot sizes for a 20-pip stop

This table uses the same example: a USD-quoted pair, $10 per pip per standard lot, and sizes rounded down to 0.01.

Account0.5% risk1% risk2% risk
$5000.01 lots ($2.50 → $2 risk)0.02 lots ($5 → $4 risk)0.05 lots ($10 risk)
$5,0000.12 lots ($25 → $24 risk)0.25 lots ($50 risk)0.50 lots ($100 risk)
$50,0001.25 lots ($250 risk)2.50 lots ($500 risk)5.00 lots ($1,000 risk)

For another stop distance, rerun the formula with the unrounded risk money. Roughly, a 40-pip stop halves the lot size and a 10-pip stop doubles it, but always round down after recalculating, and skip the trade if the result falls below your platform's minimum.

Sizing gold, crypto and non-USD pairs

The formula stays the same. Only the "pip value per 1 lot" changes. Swap it for the value of a one-unit price move per lot, which you find in the symbol's contract specification.

For gold, a lot is a set number of ounces, and that number depends on your broker. Look up what a $1 move is worth per lot, then use your stop distance in dollars. If, as an assumption, 1 lot = 100 oz, a $1 move is worth $100 per lot. A $50 risk with a $5 stop then gives $50 ÷ (5 × $100) = 0.10 lots.

For crypto, one lot is often one coin, but not always. If one lot is one coin and your stop sits $500 away, a $50 risk gives $50 ÷ $500 = 0.1 lots.

On pairs where USD is not the quote currency, the pip value is paid in that quote currency. On USD/JPY, one pip (0.01) on a standard lot is worth 1,000 yen. You convert that into your account currency before you divide. Assuming a rate of 150 yen per dollar, 1,000 yen ≈ $6.67 per pip per lot, so a $50 risk with a 20-pip stop gives $50 ÷ (20 × $6.67) ≈ 0.37 lots.

Same position size formula for EUR/USD, gold, crypto and USD/JPY with only the value per lot changing
The risk stays at $50 and the formula stays the same. Only the highlighted value per lot changes for each symbol.

Position sizing mistakes that drain small accounts

  • Setting the stop a fixed number of pips from entry so a chosen lot size fits. You can spot it when your stop sits inside normal candle noise rather than past the last swing high or low. Price then tags it by chance before your idea is tested.
  • Rounding up. 0.025 lots becomes 0.03 and you risk 20% more than planned. Always round down.
  • Using $10 per pip on every symbol. That value only holds for a standard lot on a USD-quoted pair.
  • Sizing from your starting balance. After a drawdown your old size risks a bigger share of what is left. Recalculate from the current balance every time.
  • Forcing a trade below the minimum size. Decision rule: if the smallest lot your platform allows (often 0.01) still risks more than your limit, skip the trade. Do not move the stop to make it fit.
Rounding 0.025 lots down to 0.02 versus up to 0.03 on a 500 USD account with a 20-pip stop
Rounding down keeps the loss under your plan. Rounding up turns a $5 risk into $6, which is 20% more.

Where you set position size on your trading platform

You enter the size in the order window, in a field usually called volume, quantity or lots. Some platforms ask for lots and others ask for units or coins, so check the label first. 0.25 lots and 25,000 units are the same trade.

Whatever tool shows you the size, check before you send the order that the loss shown at your stop equals your risk money.

FAQ

Does higher leverage let me use a bigger position size?

Leverage only lowers the margin you need to open the trade. It does not change what each pip costs you. Your risk still comes from your size and your stop, so let the formula set the size, not the leverage available.

Does the spread change my position size?

It changes the stop distance you put into the formula. Measure the distance from the price you actually get filled at, with the spread included, not from the middle of the chart. On a fast move, slippage can also push a loss past the planned amount, so do not size right up to your limit.

How do I size a trade I plan to add to later?

Decide the total risk for the whole idea first, then split it across the entries. If you allow 1% in total and plan two entries, each one gets 0.5%, and each gets its own stop-distance calculation.

Related terms