The risk reward ratio formula, step by step
The risk reward ratio compares what a trade can make with what it can lose, measured as price distance. It does not depend on lot size or account currency, so you can compare trades on any instrument.
The risk reward ratio formula has three parts:
- Risk = |Entry − Stop loss| ÷ pip size
- Reward = |Take profit − Entry| ÷ pip size
- Ratio (R) = Reward ÷ Risk, written as 1 : R
The calculator then adds one more line, the break-even win rate: the share of trades you must win so that wins and losses cancel out. If every win pays R and every loss costs 1, you break even when W × R = (1 − W) × 1. Solve for W and you get:
Break-even win rate = 1 ÷ (1 + R)
That last number is the useful one. A ratio on its own says nothing about whether a strategy works. The break-even line tells you the win rate your trading has to beat at that ratio. For a deeper look at that number, see the win rate needed for 1:2 risk reward.
The pip size only changes how the distances are labelled, not the ratio. EURUSD and most pairs use 0.0001, JPY pairs use 0.01. This calculator counts gold (XAUUSD) in 0.10 steps and the listed stock indices in 1-point steps. Because risk and reward use the same unit, the ratio comes out the same whatever pip convention your broker uses.
Worked example: a EURUSD trade at 1:3, before and after spread
Here is a worked example using the calculator's default trade. A trader plans a EURUSD trade with entry at 1.0850, stop loss at 1.0830 and take profit at 1.0910. The stop is below entry and the target above it, so the levels describe a buy.
- Risk = (1.0850 − 1.0830) ÷ 0.0001 = 20 pips
- Reward = (1.0910 − 1.0850) ÷ 0.0001 = 60 pips
- Ratio = 60 ÷ 20 = 1 : 3
- Break-even win rate = 1 ÷ (1 + 3) = 25%
The chart below shows where the three levels sit. The stop is a third of the target's distance from entry, which is what 1:3 looks like on a price chart.
Now add a 2-pip spread. Charts usually plot the bid price, but a buy fills at the ask, which is 2 pips higher. Your stop and target are still triggered by the bid. So the real trade starts 2 pips closer to the stop and 2 pips further from the target:
- Real risk = 20 + 2 = 22 pips
- Real reward = 60 − 2 = 58 pips
- Real ratio = 58 ÷ 22 = 1 : 2.64
- Real break-even win rate = 22 ÷ (22 + 58) = 22 ÷ 80 = 27.5%
A short way to write this: break-even with costs = (stop + cost) ÷ (stop + target), all in pips. The same shift happens on a sell, because a sell opens at the bid and closes at the ask.
- –Risk 20 pips
- –Reward 60 pips
- –Ratio 1 : 3
- –Break-even win rate 25%
- –Risk 22 pips
- –Reward 58 pips
- –Ratio 1 : 2.64
- –Break-even win rate 27.5%
The calculator shows the ratio of the levels as you type them, without costs. Add your spread plus commission (in pips) to the stop and take it off the target in your head, or read how spread changes your risk reward for commission and tight-stop cases.
Second example: gold, where the pip unit changes but the ratio does not
Gold is quoted to two decimals at most brokers. This calculator counts one gold pip as 0.10, so a $1.00 move is 10 pips. Some traders and brokers count gold in 0.01 or $1 steps instead; check your broker's contract specification. The ratio is the same either way.
Example: XAUUSD entry 2350.00, stop loss 2340.00, take profit 2375.00.
- Risk = 10.00 ÷ 0.10 = 100 pips
- Reward = 25.00 ÷ 0.10 = 250 pips
- Ratio = 1 : 2.5, break-even win rate = 1 ÷ 3.5 = 28.6%
With an example spread of 0.30 (3 pips in this unit), the real numbers become 103 pips of risk and 247 of reward. That is 1:2.40, and break-even = 103 ÷ 350 = 29.4%. Spread is a smaller share of a wide gold stop than of a tight EURUSD stop, so the ratio moves less.
How to use this calculator and read each result
Pick the instrument, then type the entry, stop loss and take profit prices exactly as you would place them. The panel updates as you type.
| Result | What it means | What to check |
|---|---|---|
| Risk : reward | Reward ÷ risk, written 1 : R | Compare it with the break-even line, not with a "magic" number |
| Direction | Buy if the stop is below entry and the target above, sell if the reverse | It must match the order you plan. A mismatch usually means a typo in one price |
| Break-even win rate | 1 ÷ (1 + R), before costs | Your measured win rate needs a clear margin above it |
| Risk (pips) | Entry-to-stop distance | Feed this into position sizing |
| Reward (pips) | Entry-to-target distance | Check it fits the instrument's typical daily range |
If the panel shows "Stop loss and take profit must sit on opposite sides of the entry price", the levels do not describe a valid trade. Usually both levels are on the same side of entry, or one of them equals the entry. Fix the price that is on the wrong side and the result returns.
The ratio does not tell you how much money is at stake. To turn the risk in pips into a lot size for a fixed share of your account, use the lot size calculator with the same stop distance, and set your risk per trade first.
What ratio is good enough? An if/then rule tied to your win rate
There is a clear answer once you know your win rate from a backtest or a long trade log. Use this rule:
- If your win rate is above the break-even rate for your ratio, after costs, the trades have positive expectancy at that ratio.
- If it is within about 5 percentage points of break-even, the edge is thin. Small changes in spread, slippage or luck can erase it.
- If it is below break-even, a higher ratio or a better hit rate is needed. Moving the target further out usually lowers the hit rate too, so test both together.
The table gives the break-even rate before costs for common ratios.
| Ratio | Break-even win rate | Losses per win you can absorb |
|---|---|---|
| 1 : 1 | 50.0% | 1 |
| 1 : 1.5 | 40.0% | 1.5 |
| 1 : 2 | 33.3% | 2 |
| 1 : 3 | 25.0% | 3 |
| 1 : 4 | 20.0% | 4 |
| 1 : 5 | 16.7% | 5 |
The curve flattens fast. Going from 1:1 to 1:2 drops the break-even rate by almost 17 points. Going from 1:4 to 1:5 drops it by just over 3. Past about 1:3, each extra unit of reward buys little, while the target gets harder to reach. The full grid of ratio versus win rate, with the profit or loss per trade in each cell, is in the risk reward vs win rate table. If you are weighing the most common setting, see whether 1:2 risk reward is good.
To combine ratio and win rate into one number, use expectancy: W × R − (1 − W), in units of risk. For example, a 40% win rate at 1:2 gives 0.4 × 2 − 0.6 = +0.2R per trade before costs. The trading expectancy formula guide shows how to work it out from real results.
Common mistakes that make the ratio lie
Setting the target to hit a ratio. Picking 1:3 first and then placing the target wherever 3× the stop lands ignores the chart. A target past the next obvious support or resistance, or past the instrument's usual daily range, gets hit less often. The ratio looks better, but the trading gets worse. Place the stop loss and target from volatility or structure first, then read the ratio: how to set stop loss and take profit distance.
Ignoring costs on tight stops. A 2-pip cost is 2% of a 100-pip stop but 20% of a 10-pip stop. A 1:3 scalp with a 10-pip stop and a 2-pip spread is really 28 ÷ 12 = 1:2.33.
Comparing ratio without win rate. "Only take 1:3 trades" is half a rule. A 1:3 strategy that wins 20% of the time loses money. A 1:1 strategy that wins 60% of the time makes money.
Measuring R after moving the stop. Your ratio and your results in R should always use the initial stop. If you move the stop to entry, the remaining risk is zero, and any ratio computed from it is meaningless.
Trusting a small sample. Over 20 trades, a 40% win rate has a margin of error of about ±11 percentage points (one standard error, √(0.4 × 0.6 ÷ 20)). Over 200 trades it shrinks to about ±3.5. Compare against break-even only after you have a large sample.
Pre-trade checklist
- Stop placed from volatility or structure, not from the ratio you want
- Target checked against nearby levels and the typical daily range
- Direction in the result matches the order you plan
- Spread plus commission (in pips) added to risk and taken off reward
- Your tested win rate clearly above the break-even rate after costs
- Lot size set from the stop distance and your risk per trade
Questions
Does a higher risk reward ratio always mean a better trade?
No. A further target is reached less often, so ratio and hit rate move against each other. Two setups are best compared on expectancy (W × R − (1 − W)), not on ratio alone. A 1:1.5 setup with a high hit rate can beat a 1:4 setup that rarely reaches its target.
How do I work out the ratio when I take partial profits?
Weight each exit by the share of the position closed there. If you close half at 1R and half at 3R, the blended reward is 0.5 × 1 + 0.5 × 3 = 2R. The trade is 1:2 overall, and break-even is 33.3% for trades that run to both targets.
Does lot size change the risk reward ratio?
No. The ratio uses price distances only. Doubling the lot size doubles both the money at risk and the money at stake, so the ratio stays the same. Lot size decides how much a loss of 1R costs your account.
How do I record a trade in R in my journal?
Divide the result by the initial risk. A trade with a 20-pip stop that you close early at +30 pips is +1.5R; one stopped out with 2 pips of slippage is −1.1R. Recording every trade in R lets you compare results across instruments and lot sizes, and it feeds straight into the expectancy formula.









