Breakout Confirmation
Free MT5 indicator that scores swing breakouts on strength, tick volume and follow-through. Lab: 0 of 200 arrows repainted on EURUSD M15.

- Repainted
- 0 / 200
- Signals / week
- ≈ 15.8
- Tested on
- EURUSD M15
- Tested
- 2026-10-05
Overview
Breakout Confirmation is a free MT5 indicator that draws on the main chart. It plots swing resistance and support lines, and it draws a Confirmed Bullish or Confirmed Bearish arrow only after a breakout of one of those lines scores enough points on closing strength, tick volume and follow-through. In the Lab's repaint test, 0 of 200 arrows changed on EURUSD M15.
It is for traders who already trade level breaks and want each break graded before they act, instead of reacting to every candle that pokes through a line.
What it draws on your chart
- Resistance Level and Support Level lines: the nearest unbroken swing high and swing low. A swing is a bar whose high (or low) beats
LookbackSwingbars on each side. A level stays on the chart until a close breaks it. - Confirmed Bullish / Confirmed Bearish arrows: a breakout that held and reached
MinConfirmScorepoints out of 3. - Score Label: the score text next to each confirmed arrow. Labels older than
HistoryBarsbars are deleted, and all labels are hidden while the Labels toggle is off. - Breakout Score panel: shows the last confirmed breakout and its score, the resistance and support being watched, the score of any pending breakout and how many bars it has left, the raw / confirmed / cancelled / weak counts for the last 50 bars, the confirm rate, and the state of the HTF EMA50 filter.
A breakout in this tool means a bar that closes beyond the level. A wick alone does not count. The glossary has the general idea. The screenshots on this page show the tool on a full chart, on H4 and M5, a close-up of the panel, and the Inputs window with the default settings.
How the Lab tested it
The Lab tested version 1.00 (153.8 KB) in MT5 build 6230 on 2026-10-05. The test used EURUSD M15 from 2026-07-06 to 2026-10-02, with real ticks from Raw Trading Ltd.
- Repaint: the Lab logged 200 signals live, and 0 of them later changed or disappeared. The maximum arrow delay was 0 bars. Once an arrow is on the chart, it stays where you saw it.
- Frequency: 15.8 arrows per week in total, 7.6 bullish and 8.2 bearish. On M15 that is about three a day, which is enough to be selective.
- Speed: the median signal reached 1 ATR one way or the other within 2 bars, which is 30 minutes on M15. 0% of signals failed to reach 1 ATR either way within 20 bars, so every arrow was settled one way or the other within 5 hours on M15.
The chart below shows how often price travelled 1 ATR in the arrow's direction before it travelled 1 ATR against it.
Scale zoomed in to show the difference (bars do not start at zero).
In plain terms, all arrows together came out just under a coin flip. Bullish arrows were slightly above it and bearish arrows were clearly below it in this period. The arrow tells you that a break held and scored well. It does not give you an edge on its own, so use it with your own direction filter and risk plan.
The Lab ran only this one symbol and timeframe. Other pairs, gold, indices and other timeframes have no Lab numbers.
Who it is for
It suits discretionary traders on intraday charts who mark swing highs and lows by hand and want a consistent, non-repainting way to tell a scored breakout from a bare poke through the line.
How it works
- 1Finds swing highs and lows with bars on each side, kept as resistance and support until broken.
Swing High: High higher than LookbackSwing bars on each sideInputs: LookbackSwing - 2A close beyond the nearest level starts a pending breakout and scores it on three tests: close distance, volume, follow-through.
Strength point: abs(Close - Level) >= StrengthATRMult x ATR | Volume point: volume >= VolumeMult x 20-bar averageInputs: StrengthATRMult, VolumeMult - 3Adds a follow-through point if a later bar closes even further beyond the breakout close.
Follow-through point: next Close > breakout Close (up) or < (down) - 4Confirms once the score reaches the minimum inside the window, closing back across cancels, timing out marks it weak.
Confirm if Score >= MinConfirmScore within ConfirmWindow barsInputs: ConfirmWindow, MinConfirmScore - 5Optionally rejects signals against the slope of a higher-timeframe moving average.
Allowed only if higher-timeframe average slope matches breakout directionInputs: UseHTFFilter, HTFPeriod
Specifications
- Platform
- MetaTrader 5
- Version
- 1.00
- Type
- Indicator
- Window
- Main chart
- Draws
- 2 arrows, 2 lines, 1 zone, 1 panel
- Alerts
- popup, push, sound
- Repaints
- No (0 of 200 signals changed)
- Inputs
- 16
- Tested on
- MT5 build 6230 · 2026-10-05
Repaint test
No repaint detected. In a 6 Jul 2026 – 2 Oct 2026 test on EURUSD M15 (Raw Trading Ltd real ticks), 200 signals were logged at bar close and re-read at the end of the test: 0 changed. Arrows print on the bar that closes the signal, with no delay.
IndicatorFree — tested 2026-10-05 · MT5 build 6230 · Raw Trading Ltd real ticks. Results come from historical data, not live trading, and do not guarantee future results.
Signal statistics
Over 6 Jul 2026 – 2 Oct 2026 on EURUSD M15, the indicator printed 200 arrows. After 48.5% of them, price moved 1×ATR(14) in the arrow's direction before moving 1×ATR against it (median 2 bars). 0% reached neither level within 20 bars.
This measures price movement after the arrow, not a trading result. It includes no spread, commission, stop loss or position sizing.
What it draws
- Arrows (Confirmed Bullish) from buffer 0, drawn on the closed bar.
- Arrows (Confirmed Bearish) from buffer 1, drawn on the closed bar.
- A line (Resistance Level) from buffer 2.
- A line (Support Level) from buffer 3.
- Rectangles (Score Label) drawn as chart objects, not buffers — they are not readable by iCustom() in an EA.
- An on-chart panel (Breakout Score); values shown in the panel are not exposed as buffers.
Inputs
| Input | Default | What it does |
|---|---|---|
| LookbackSwing | 5 | Bars on each side that confirm a swing high / low used as a level (2-20) |
| HistoryBars | 2000 | Closed bars scanned on load; older score labels are removed (300-10000) |
| ConfirmWindow | 3 | Bars after the raw breakout to wait for follow-through (1-10) |
| StrengthATRMult | 0.25 | Strength point: the close must clear the level by this x ATR(14) (0.05-1.0) |
| VolumeMult | 1.3 | Volume point: tick volume must be this x the 20-bar average (1.0-3.0) |
| MinConfirmScore | 2 | Points out of 3 needed to mark a Confirmed Breakout (1-3) |
| UseHTFFilter | false | Confirm only breakouts in the direction of the higher timeframe EMA50 slope |
| HTFPeriod | H1 | Higher timeframe for the EMA50 filter (used only when the filter is on) |
| EnableAlertPopup | true | Popup alert when a breakout is confirmed |
| EnableAlertPush | false | Push notification when a breakout is confirmed |
| EnableAlertSound | true | Sound when a breakout is confirmed |
| EnableWatchingAlert | false | Also alert early when a raw breakout starts being scored |
| ShowDashboard | true | Show the status panel |
| PanelScale | 1 | Panel size multiplier (DPI is applied automatically) |
| Theme | Dark | Chart color theme |
| RestoreTheme | true | Restore the original chart colors when the indicator is removed |
How to read it
How one breakout becomes an arrow
Each breakout goes through the same steps. The flow below shows them in order.
- 1Swing level foundHigh or low beats LookbackSwing bars on each side; kept until broken
- 2Raw breakoutA closed bar closes beyond the nearest unbroken level; scoring starts
- 3Score up to 3 pointsStrength: close clears level by StrengthATRMult x ATR(14). Volume: tick volume >= VolumeMult x 20-bar average. Follow-through: a later close
- 4Outcome inside ConfirmWindowScore reaches MinConfirmScore = arrow and alert. Close back across the level = cancelled. Window runs out = weak
- 5Optional HTF filterWith UseHTFFilter on, only breakouts in the direction of the HTFPeriod EMA50 slope are confirmed
The arrow appears as soon as the score reaches MinConfirmScore inside the ConfirmWindow. It does not wait for the window to run out. The follow-through point needs a later bar, so with MinConfirmScore set to 3 the arrow can never come on the breakout candle itself.
The illustration below shows what this looks like on a chart: a wick through resistance that is not scored, followed by a real close above the level that scores and confirms.
Reading each element
- Resistance Level line: a close above it starts a bullish breakout that gets scored. While price stays below it, nothing happens and the level is still watched.
- Support Level line: a close below it starts a bearish breakout that gets scored. While price stays above it, nothing happens and the level is still watched.
- Confirmed Bullish / Bearish arrow: the break has not closed back across the level, and it scored at least
MinConfirmScoreout of 3 inside the window. - Score Label: tells you whether the break scored 2 or 3. A 3 means it passed all three checks: closing strength, volume and follow-through.
- Panel counts: if the last 50 bars show many cancelled or weak breakouts and only a few confirmed ones, levels on this chart are breaking messily right now.
Common misread: with EnableWatchingAlert on, you get an alert when a raw breakout starts being scored. That alert is not a signal. It only means a close crossed the level. Wait for the arrow, or watch the pending score and bars left on the panel.
Inputs to change first
MinConfirmScore(default 2, range 1-3): the main filter. Set it to 3 to require all three checks, which gives fewer and later arrows. Set it to 1 to mark almost every break that holds.LookbackSwing(default 5, range 2-20): a higher value keeps only bigger swings as levels, so there are fewer levels and fewer breakouts.ConfirmWindow(default 3, range 1-10): the number of bars a breakout gets to earn its score. A longer window lets slower breaks confirm but can make arrows come later.StrengthATRMult(default 0.25) andVolumeMult(default 1.3): raise these to make the strength point and the volume point harder to earn.UseHTFFilter(default off) withHTFPeriod(default H1): when on, it rejects breakouts that go against the higher-timeframe EMA50 slope.HistoryBars(default 2000),ShowDashboard,PanelScale,ThemeandRestoreTheme: these control display only.
Alerts
Alerts fire when a breakout is confirmed. EnableAlertPopup (on by default) opens the MT5 alert window. EnableAlertSound (on by default) plays a sound. EnableAlertPush (off by default) sends a push notification to the MetaTrader app on your phone, which requires your MetaQuotes ID to be set in the terminal.
A decision rule to start from
Take an arrow only if it agrees with your higher-timeframe direction, either from your own read or with UseHTFFilter on, and only if the Score Label shows 3. Skip an arrow when the panel's last-50-bar counts show more cancelled than confirmed breakouts. This rule is an untested starting point, not a Lab result.
Installation
- 1Download BreakoutConfirmation.ex5 from the button above (Google Drive).
- 2In MetaTrader 5: File → Open Data Folder → MQL5 → Indicators. Copy BreakoutConfirmation.ex5 there.
- 3Restart MT5 or right-click Indicators in Navigator → Refresh.
- 4Drag Breakout Confirmation onto a chart. For push alerts, enable "Allow push notifications" under Tools → Options → Notifications.
- Tested on MT5 build 6230.
Key terms and guides
- Wick
- A wick is the thin line above or below a candlestick's body. It marks the highest and lowest prices traded in that period that price could not hold until the candle closed.
- Swing High/Low
- A swing high is a candle whose high sits above the highs of the candles on both sides of it. A swing low is a candle whose low sits below the lows on both sides. Together they mark the turning points of price.
- Breakout confirmation
- Breakout confirmation is the evidence you wait for before you trust a breakout. It usually means a candle closing beyond a support, resistance or range edge, and price staying outside the level afterwards.
- Higher Timeframe
- A higher timeframe is any chart period longer than the one you trade on, such as the daily chart for someone trading the 1-hour chart. Traders use it to see the bigger trend and the main price levels around their smaller-chart trades.
- Candlestick
- A candlestick is one bar on a price chart that shows four prices for a set period: the open, high, low and close. A thick body spans the open and close, and thin wicks reach the high and low.
- Support
- Support is a price zone where a falling market has stopped and turned higher more than once because buyers stepped in there. Traders use it to choose where to buy, and they put the stop loss just below the zone so a clean break ends the trade.
More on this subject: Breakouts & sessions guide, terms and tools
User reviews
No reviews yet. Members who download the tool can review it here.
Sign in and download the tool to review it.
Build a checklist with it
Breakout Confirmation does one job on the chart: entry signal. Put it on the same chart as the tools below and the IndicatorFree panels merge into one checklist card, ordered trend, zone, signal, risk.
- Trend / contextMarket Structure ShiftBreakout Confirmation tells you when; this tells you which way the market leans, so you can skip signals against it.
- Zone / levelSession Volume ProfileShows the zones and levels, so you can see whether a signal from Breakout Confirmation fires at a level worth trading.
The Lab has not tested these combinations. Each tool is tested on its own; the card only lines up what each one says. Free members get 2 new tools a day. If one has to wait until tomorrow, install BlackBox to raise the limit to 5 a day (20 on a live account).
FAQ
Does Breakout Confirmation repaint?
No repaint detected. In a 6 Jul 2026 – 2 Oct 2026 test on EURUSD M15 (Raw Trading Ltd real ticks), 200 signals were logged at bar close and re-read at the end of the test: 0 changed. Arrows print on the bar that closes the signal, with no delay.
Can I use Breakout Confirmation in an EA?
Yes. Read buffer 0 (Confirmed Bullish) with iCustom() on bar 1 — the last closed bar.
Why can’t my EA read the zones?
Zones and the panel are chart objects, not indicator buffers, so iCustom() does not return them.
How do I get alerts on my phone?
Enter your MetaQuotes ID under Tools → Options → Notifications, tick "Enable push notifications", and keep the push alert input on.
Does it work on other pairs?
Tested on EURUSD only; other symbols not tested.
Which timeframe is best for Breakout Confirmation?
The Lab only measured EURUSD M15, so that is the one timeframe with real numbers. It runs on any timeframe, including H4 and M5 as the screenshots show, but check the panel's confirm rate on your own chart before you trust it there.
Does it work for the New York open or other sessions only?
It does not depend on sessions. It scores breaks of swing highs and lows whenever they happen, in any session. It does not draw an opening range.
Can I use it on MT5 mobile?
No. Custom indicators run only in desktop MT5. You can turn on EnableAlertPush so confirmed breakouts reach the MetaTrader app on your phone.
Can I make the chart easier to read or hide the score text?
The Theme input sets the chart colors, and RestoreTheme puts your original colors back when you remove the indicator. Score labels are hidden while the Labels toggle is off, and PanelScale resizes the panel.
Will it work on gold or indices?
It attaches to any MT5 symbol, and its strength and volume checks scale with that symbol's ATR(14) and tick volume. The Lab has only tested EURUSD M15, so other markets have no Lab results.
Changelog
- 1.00Initial release: scores every swing breakout on three checks (closing strength vs ATR(14), tick-volume surge, follow-through) and only marks a Confirmed Breakout once the minimum score is reached, instead of drawing an. · 2026-10-09
Final verdict
The Lab's verdict
This is a well-built breakout grader. Its strongest point is proven: no arrow repainted or moved in the live log, so what you see in history is what you would have seen in real time. The three-point score, the cancelled / weak counts and the pending-score readout on the panel show you why a break was accepted or rejected. Very few breakout tools are that transparent.
Its weak point is direction. In the Lab sample, confirmed arrows were not better than a coin flip at reaching 1 ATR first, and bearish arrows did worse than bullish ones. Treat the arrow as an alert that a level break held and scored. Do not read it as a forecast of where price goes next.
What it cannot do
- It gives no stop-loss, no take-profit and no position size.
- It only uses swing highs and lows. It does not draw opening ranges, previous-day highs and lows, session boxes or gaps.
- The only Lab numbers are for EURUSD M15. Every other symbol and timeframe is untested.
- It cannot run in the MT5 mobile app. Only push alerts reach your phone.
Skip it if
- You trade opening-range or session breakouts. This tool does not know when sessions open.
- You want a tool that picks direction for you.
- You scalp M1 and need entries the moment price breaks a level. A scored confirmation always arrives after the break.
Settings to start with
Start on M15 with the defaults, since those are what the Lab tested. Then try UseHTFFilter = true with HTFPeriod = H1 to see whether filtering by the higher-timeframe slope removes the weaker bearish arrows on your pair. If you get too many arrows, try MinConfirmScore = 3. On M5, try LookbackSwing = 8 so that only larger swings become levels. None of these values was tested by the Lab, so compare each one with the default before you rely on it.
An idea to pair it with
If you want breakouts that come out of a tight range rather than from any swing, run it alongside Box Breakout. Then take a Confirmed arrow only when it also breaks a consolidation box. This is an idea to try. The Lab has not tested the pair.





















