Skip to content
MT5MT4soonTradingViewsooncTradersoonNinjaTradersoonPythonsoon
Brokers, accounts & prop firms

Execution speed

Also called Order execution speed, Trade execution speed, Fill speed, Execution latency

Execution speed is the time between sending an order and your broker confirming the fill, usually measured in milliseconds. The slower it is, the further the price can move before you are filled.

Half a pip lost per trade barely matters on a 100-pip swing trade, but it eats 10% of a 5-pip scalp. So work out what your delay costs you in pips before you decide whether speed is a problem.

What happens between your click and your fill

An order passes three stages before it becomes a position. Each stage adds delay, and you control only some of them.

Leg of the tripWhat slows itWhat you can change
Your device to the broker's serverDistance, weak internet, mobile signalConnection, server choice, a hosted computer near the server (a VPS)
Inside the brokerRisk checks, dealing rules, busy serversOnly your choice of broker and account type
Broker to the liquidity sourceThin liquidity, news spikes, order sizeOrder type, trade size, time of day

A liquidity source is the bank or larger dealer whose prices your broker fills your order against, and liquidity is thin when few of them are quoting, so there are fewer prices to fill at.

The network part of the first leg is called latency or ping. A common misread is treating a low ping as proof of fast execution. Ping measures only the first leg. An order can arrive quickly and still wait inside the broker.

The three legs of an order's trip, and the one leg that ping measures
A low ping only means the first leg is fast. The order can still wait inside the broker or at the liquidity source.

How to measure your own execution speed and slippage

Measure the three parts in this order:

  1. Ping. The connection indicator on your platform shows your ping to the trade server, and on some platforms you can switch to a closer server. This covers only the first leg.
  2. Request-to-fill time. The trade log or journal timestamps the order request and the fill. Subtract one from the other to get your real execution time for each trade. If the log shows only whole seconds, look for an execution-time figure in milliseconds next to the fill line, and if there isn't one, judge speed by slippage instead.
  3. Slippage. Compare the price you requested with the price you were filled at.

The gap between the price you clicked and the price you got is slippage. It grows with the delay and with how fast the market is moving. A delay can also fill you at a better price when the market moves your way. The cost to count is the average across all your fills, not only the bad ones. The drawing below shows a buy order sent while the price is rising.

Price moving during the execution delay on a buy order
The shaded box is the delay. Its height is what the delay cost you.

The fill price is always in the log, but the requested price may not be: many logs show only "buy at market". Take it from the requested price in the journal line if your platform records one, or from the bid/ask you wrote down or screenshotted when you clicked. If you can't get it either way, test with pending orders, because their requested price is always logged. Subtract one price from the other and convert the result to pips (on EUR/USD, 0.00010 = 1 pip). Then average the results over all your trades. That average is your slippage per trade, and you can use it in place of 0.5 in the calculation below.

If big slippage goes with long fill times, the delay is the cause; check ping first, then the broker. If big slippage happens on fast fills too, the market was moving fast (volatility), and a faster connection won't help.

The order window also shows the execution type the account uses. With instant execution you get your exact price, or a requote or a rejection. With market execution you are filled at the next available price. On some accounts the window also has a maximum deviation field, which is the most slippage you will accept before the order is rejected.

A tight deviation protects your price but causes more rejected orders in fast markets. A wide one gets you filled, at whatever price is available.

How a maximum deviation setting decides between a fill and a rejection on a buy orderIllustration
0.5 pip slippageWide deviation limit1.10010Available price: 1.100051.10005Tight deviation limit1.10003Clicked price: 1.100001.10000
Illustrative values: 0.5 pip of slippage is more than the tight 0.3-pip limit allows, so that order is rejected. The wide 1-pip limit fills it at 1.10005.

How a slow fill turns into lost pips

Here is an illustrative example with round numbers. You buy 1 standard lot of EUR/USD (100,000 units), where 1 pip is worth $10. You click at 1.10000 and are filled at 1.10005, which is 0.5 pip worse. You place 40 trades like this in a month.

What 0.5 pip of slippage costs on 1 standard lot
Cost per trade0.5 × $10= $5
Cost per month$5 × 40= $200
Monthly cost of slippage$200

On a mini lot (0.1) divide by 10: $0.50 a trade, $20 a month. On a micro lot (0.01) divide by 100: $0.05 a trade, $2 a month.

The chart below shows the same 0.5 pip against three targets.

A workable rule: if your average slippage is more than about a tenth of your average target, treat speed as a main cost and fix it before anything else. If it is a tiny fraction, spread and commission deserve your attention first.

0.5 pip of slippage as a share of the profit target for a 5-pip, 20-pip and 100-pip tradeIllustration
5-pip scalp
10%
20-pip day trade
2.5%
100-pip swing
0.5%
The same 0.5 pip reaches the one-tenth line on a 5-pip scalp, takes 2.5% of a 20-pip target and barely shows on a 100-pip swing trade.

Speed hurts most on stop orders. A stop-loss or a stop entry order becomes a market order the moment its price is touched, so in a fast market it fills at the next available price, which can be past your level. A limit order works the other way: it fills at your price or better, or not at all. Use one when price matters more than getting in.

Checks to run before you rely on a broker's speed

  • Use at least 20 small live trades, not 2 or 3, before you judge a broker, because a few fills can't separate a slow broker from one bad moment.
  • Test on a live account. Demo orders are usually not routed to real liquidity, so demo fills flatter the result.
  • Test at the times you actually trade. A broker's average hides the slow fills around news releases and the daily rollover.
  • Count slippage in both directions. If fills are almost always worse and rarely better, look at how the broker handles orders, not only at speed.
  • If you run an automated strategy, host it close to the broker's server and re-measure after every move.

FAQ

Why do my orders get requoted?

Requotes cluster in fast markets, when the price on screen moves before the broker processes your order. Switching to a market-execution account or widening the maximum deviation stops them, at the cost of more slippage.

Which forex broker has the fastest execution?

No single answer holds for everyone, because your location and connection are part of the result. Advertised averages usually leave out the trip from your device to the broker, and they hide the slow fills.

Why is my execution slower during news?

During a release, many traders send orders in the same few seconds. Liquidity providers also pull or widen their quotes until the market absorbs the number. Your order waits in a queue and has fewer prices to fill against, so it takes longer and slips further. A faster internet line will not fix this. If you trade the release anyway, use a limit order or wait for price to settle.

Does execution speed matter for pending limit orders?

Mainly when you move or cancel it: if price reaches the level before your change arrives, the old order fills. While it just waits, it usually sits on the broker's side, so your connection does not change the price it fills at.

Related terms