Skip to content
MT5MT4soonTradingViewsooncTradersoonNinjaTradersoonPythonsoon

How Forex Trading Works: A Step-by-Step Lesson for Beginners

beginner13 min readOct 9, 202611 viewsUpdated Nov 2
Learn Forex from zero · lesson 7 of 130 · chapter 1

Forex trading works by exchanging one currency for another and profiting from changes in the exchange rate between them. You always trade a pair, such as EUR/USD. You buy if you expect the first currency to rise against the second, and sell if you expect it to fall. A broker quotes you two prices, you pay the gap between them, and leverage lets a small deposit control a much larger position.

Leverage is where most beginners lose money, because it multiplies losses just as much as gains. Get the size wrong and one 20-pip move can take a fifth of a $1,000 account. This lesson shows you how to work out that number before you click.

What the forex market is and who trades in it

Forex (short for foreign exchange) is the global market where currencies are traded for one another. It has no central building and no single exchange. It is a network of banks, funds, companies, brokers and governments trading with each other electronically.

Most of the money changing hands comes from banks, funds and companies, not from individuals betting on direction. The price your broker quotes you is the spot price: the rate for exchanging the two currencies now.

The big banks trade with each other in the interbank market. Some of them act as a liquidity provider, streaming buy and sell prices to brokers. Your broker either passes those prices on to you or acts as a market maker and takes the other side of your trade itself. Retail traders usually trade a CFD (contract for difference: an agreement to settle the price change, with no currency delivered) or a rolling spot contract (a spot position the broker carries over to the next day). You never receive a stack of euros. Only the profit or loss is settled in your account currency.

How a forex price reaches a retail trader: interbank market, liquidity providers, broker, you
You trade at the end of this chain. You hold a contract, not currency, and only the profit or loss reaches your account.

How to read a currency pair quote

Every forex price is a currency pair. The first currency is the base currency and the second is the quote currency. Say EUR/USD shows 1.1000. That means one euro costs 1.1000 US dollars.

If EUR/USD rises to 1.1050, one euro buys more dollars than before. If it falls, one euro buys fewer. Every quote answers the same question: how much of the second currency does one unit of the first currency cost?

Here is a common misread: "EUR/USD fell, so the dollar is strong." That may be true, or the euro may have weakened while the dollar did nothing. A pair is a ratio, so on its own it can't tell you which side moved. To find out, look at the same currency against others. If EUR is falling against USD, GBP and JPY at the same time, the euro is the weak side.

Checking which currency moved: EUR falling against USD, GBP and JPY at the same time
Illustrative values. One falling pair can't tell you which side moved. When EUR falls against USD, GBP and JPY at once, the euro is the weak side.

Pairs that combine the US dollar with another large economy's currency are called major currency pairs. A pair of two non-dollar currencies, like EUR/GBP, is a cross currency pair. A pair that includes the currency of a smaller or emerging economy is an exotic pair.

Pips and lots: the units every trade is measured in

A pip is the standard smallest price step in a quote. For most pairs it is the 4th decimal place. For pairs quoted in Japanese yen it is the 2nd. If EUR/USD moves from 1.1000 to 1.1001, that's 1 pip. If USD/JPY moves from 150.00 to 150.01, that's also 1 pip.

Many brokers show one extra digit, such as 1.10005. That last digit is a tenth of a pip, so don't count it as a full pip when you measure a move.

Where the pip sits in a quote: 4th decimal on EUR/USD, 2nd decimal on USD/JPY, plus the extra tenth-of-a-pip digit
Count pips at the boxed digit. The extra last digit some brokers show is only a tenth of a pip.

A lot is the size of a trade. A standard lot is 100,000 units of the base currency, a mini lot is 10,000 units and a micro lot is 1,000 units. In the order window you enter these as 1.00, 0.10 and 0.01 lots.

Combine pips and lots and you get money. On EUR/USD the quote currency is the dollar, so one pip is worth the number of units × 0.0001 dollars:

SizeUnits of EURValue of 1 pip on EUR/USD
1.00 lot (standard)100,000100,000 × 0.0001 = $10
0.10 lot (mini)10,00010,000 × 0.0001 = $1
0.01 lot (micro)1,0001,000 × 0.0001 = $0.10

When the dollar is not the quote currency, the pip value is first worked out in the quote currency and then converted to your account currency. That means it shifts slightly as exchange rates move.

Bid, ask and spread: the cost you pay the moment you open

Your broker always shows two prices. The bid price is the price you can sell at. The ask price is the price you can buy at, and it is always the higher of the two. The gap between them is the bid-ask spread, and it is the first cost of every trade.

For example, suppose EUR/USD is quoted at 1.10000 bid and 1.10010 ask. The spread is 0.00010, which is 1 pip. The ladder below shows the two prices and the gap between them.

EUR/USD example quote: bid 1.10000, ask 1.10010 and the 1-pip spread between themIllustration
Spread: 1 pipAsk (you buy)1.10010Bid (you sell)1.10000

When you buy, you pay the ask of 1.10010. When you close, you sell at the bid. So if you closed straight away, you would sell at 1.10000 and be 1 pip down before the price had moved at all. On a 0.10-lot trade that 1 pip is worth $1.

The spread is not fixed. It tends to widen when fewer participants are trading, such as during quiet hours or in the seconds around major news. The same trade can cost more if you place it at the wrong time.

Going long or short: you can trade both directions

Going long means buying a pair, and you profit if the base currency rises against the quote currency. Going short means selling the pair, and you profit if it falls. Selling EUR/USD means selling euros and buying dollars at the same time. You don't need to own any euros first.

The profit formula is the same in both directions, just reversed:

  • Long: (exit price − entry price) × units
  • Short: (entry price − exit price) × units

For example, say you sell 0.10 lots (10,000 units) of EUR/USD at 1.1000 and buy them back at 1.0970. Your profit is (1.1000 − 1.0970) × 10,000 = 0.0030 × 10,000 = $30. That is 30 pips at $1 a pip.

Short EUR/USD example: sell 0.10 lots at 1.1000, buy back at 1.0970 for 30 pipsIllustration
Sell (entry) 1.10001.1000Buy back (exit) 1.09701.097030 pips × $1 = $30Sell 0.10 lotsBuy back
A short trade makes money as the price falls. Here it drops 30 pips from entry to exit, which is $30 at $1 a pip.

Leverage and margin: how a small deposit controls a big position

Leverage lets you control a position much larger than your deposit, with the broker covering the rest. The part of your money set aside to hold the position is called margin. The formula is: margin = lots × contract size ÷ leverage.

At 1:100 leverage, a 100,000 EUR position (1 standard lot of EUR/USD) needs 1,000 EUR of margin, which is 1% of the position. The calculation below works this out for one standard lot and for the 0.05 lots used in the trade example in the next section.

Margin for EUR/USD at 1:100 leverage: 1 lot vs 0.05 lots
Position value, 1 lot1 × 100,000 EUR= 100,000 EUR
Margin, 1 lot at 1:100100,000 EUR ÷ 100= 1,000 EUR
Position value, 0.05 lots0.05 × 100,000 EUR= 5,000 EUR
Margin, 0.05 lots at 1:1005,000 EUR ÷ 100= 50 EUR
Margin for the example trade50 EUR (1% of 5,000 EUR)

Beginners often miss this: your profit and loss is calculated on the full position, not on the margin. One pip on 1 lot of EUR/USD is worth $10 whatever leverage you use. In the illustrative example below, EUR/USD is at 1.1000. A 1% move against 1 lot is 110 pips, or 110 × $10 = $1,100. So at 1:100 leverage, a 1% move against you wipes out the whole 1,000 EUR margin you put up. The loss is counted in US dollars and the margin in euros, but at 1.1000 the $1,100 loss equals exactly 1,000 EUR.

At 1:100 leverage, a 1% move against 1 lot of EUR/USD at 1.1000 costs about $1,100, equal to the 1,000 EUR margin
Illustrative example at EUR/USD 1.1000. Profit and loss are worked out on the whole 100,000 EUR bar, not on the margin sliver, so a 1% move against you costs about $1,100. At 1.1000 that equals the 1,000 EUR margin.

Margin is a deposit, not a cap on your loss. Your equity (your balance plus or minus open profit and loss) takes the losses. If it falls too far, your broker can close your positions for you. A simple way to remember it: leverage decides how big a trade you are allowed to open, and lot size decides how much you can lose.

How a forex trade works, step by step

The numbers in this walkthrough are an illustrative example. Say you have a $1,000 account and you expect the euro to strengthen against the dollar.

  1. Choose the pair and direction. You expect EUR to rise against USD, so you plan to buy (go long) EUR/USD.
  2. Decide where your idea is proven wrong. The ask is 1.1010. If the price falls to 1.0990, your idea has failed, so that is your stop-loss, 20 pips below entry. You set your take-profit at 1.1050, 40 pips above entry.
  3. Decide how much you can afford to lose. You choose to risk 1% of the account: $1,000 × 1% = $10.
  4. Work out the lot size from that risk. On 1 lot each pip is worth $10, so a 20-pip stop would cost 20 × $10 = $200 per lot. Your size is $10 ÷ $200 = 0.05 lots, so each pip is worth 0.05 × $10 = $0.50. The margin is 0.05 × 100,000 ÷ 100 = 50 EUR, about $55 at this price. The chart below shows where the stop sits.
  5. Place the order. A market order to buy fills at the ask of 1.1010. You attach the stop-loss at 1.0990 and the take-profit at 1.1050, so the trade closes even if you are not watching.
  6. Let the trade close. A buy position closes by selling at the bid, so the bid price is what triggers your stop and your target.
Example EUR/USD buy at 1.1010 with a stop-loss 20 pips below and a take-profit 40 pips aboveIllustration
Take profit 1.1050 (+40 pips)1.1050Entry 1.10101.1010Stop-loss 1.0990 (−20 pips)1.0990Take profit hitBuy 0.05 lots
The stop sits 20 pips under the entry and the target 40 pips above it, so the trade risks $10 to make $20.

In this example the price rises to 1.1050, and the take-profit closes the trade: (1.1050 − 1.1010) × 5,000 = 0.0040 × 5,000 = +$20, which is 40 pips × $0.50. If the price had fallen to 1.0990 instead, the stop would have closed it: (1.0990 − 1.1010) × 5,000 = −$10, which is exactly the 1% you planned to risk. In a fast market, around news or over a weekend gap, a stop can fill at a worse price, so the real loss can be bigger than planned. You already paid the spread when you bought at the ask.

Look at the order of the steps. You set the stop and the amount at risk first, and the lot size came last. Most beginners do it the other way round.

When the forex market is open

During the trading week, forex has no single closing bell. Trading moves around the world through overlapping forex trading sessions, so the market is active somewhere nearly 24 hours a day. The three sessions you will hear about most run roughly as follows, in GMT: Tokyo 00:00–09:00, London 08:00–16:00 and New York 13:00–22:00. Treat these hours as approximate, because different sources give slightly different times. The timeline below shows these three sessions, with the London–New York overlap shaded.

Tokyo, London and New York forex sessions on a 24-hour GMT clock
London–New York overlap04812162024GMTTokyoLondonNew York

These times are not fixed all year. The UK and the US move their clocks forward an hour in their summer, so in those months the London and New York sessions start and end about an hour earlier in GMT. Japan does not change its clocks.

To use these times, convert them to your own clock and allow for that shift. Kenya (GMT+3), South Africa (GMT+2) and India (GMT+5:30) do not change their clocks. So London's open falls at about 11:00 in Nairobi, 10:00 in Johannesburg and 13:30 in Mumbai during the UK winter, and about an hour earlier during the UK summer.

Sessions matter because more active traders means more orders on both sides. That usually brings tighter spreads and steadier fills. A pair is usually most active while the sessions for both of its currencies are open. That is why EUR/USD tends to move more in London and New York hours than in the middle of the Tokyo session.

What makes exchange rates move

Exchange rates move with supply and demand for each currency. A company paying for imports in dollars has to buy dollars. An investor looking for a higher interest rate buys that country's currency. Each of these orders pushes the price a little.

The main drivers you will hear about:

  • Interest rates and central bank decisions: higher expected rates tend to draw money into a currency.
  • Economic data: jobs, inflation and growth figures change what traders expect central banks to do next.
  • Risk mood: when markets are fearful, money often moves toward currencies seen as safer.
  • Trade and capital flows: companies and funds converting large amounts of money for business or investment.

Beginner mistakes that cost real money, and how to avoid each

Choosing the lot size by feel. Always work the size out from the stop, as in step 4 of the walkthrough.

Treating margin as your risk. Your loss is set by your stop and lot size, not the margin, as the leverage section showed.

Trading without a stop, or moving it further away. Without a stop, one bad move can take far more than you planned to lose. Fix: set the stop when you place the order, and only ever move it in the direction that lowers your risk.

Ignoring the spread on small targets. With a 1-pip spread, a 40-pip target loses 1/40 of its distance to cost. A 5-pip target loses 1/5 of it. Fix: the shorter your trades, the more the spread and the time of day matter. Avoid quick trades when spreads are wide.

Share of the target used up by a 1-pip spread: 40-pip target vs 5-pip targetIllustration
40-pip target
1/40 (2.5%)
5-pip target
1/5 (20%)
The same 1-pip spread costs 1/40 of a 40-pip target but 1/5 of a 5-pip target, so short trades feel the spread far more.

Letting an income goal set your trade size. Many newcomers start with a figure they want to earn and work backwards to the trade. Suppose you deposit $150 and want $800 from one 40-pip move. You would need $800 ÷ 40 = $20 per pip, which is 2 standard lots on EUR/USD. At $20 a pip, a move of just $150 ÷ $20 = 7.5 pips against you would wipe out the whole deposit. You couldn't even open the trade: the margin at 1:100 is 2 × 100,000 ÷ 100 = 2,000 EUR, far more than the account holds. Fix: if your goal needs a trade size that risks more than a small, fixed share of the account (like the 1% in the example above), change the goal, not the risk.

Reading the pair backwards. Before you click, check which currency you are buying and which you are selling, as covered in the quote section.

A five-point check before every trade

Go through these five questions before you click buy or sell. If you can't answer one of them, don't place the trade yet.

  1. Which currency am I buying, and which am I selling?
  2. Where is my stop, as a price and in pips?
  3. How much do I lose if the stop is hit, and is that within my fixed risk per trade?
  4. How big is the spread right now compared with my target?
  5. Which session is open, and is major news due while the trade is running?

FAQ

Is it safe to start forex trading now?

A big part of safety is who holds your money. Use a broker licensed by the financial regulator in your country, and check the regulator's public register to confirm that licence before you deposit. A demo account teaches you the mechanics, but it can't teach you slippage on real fills or how you react when real money is at risk.

How much money do I need to start trading forex?

Work it out from your risk, not from the broker's minimum deposit. The smallest common size, 0.01 lots on EUR/USD, is worth $0.10 a pip, so a 20-pip stop risks 20 × $0.10 = $2. If you want that to be 1% of your account, you need $2 ÷ 1% = $200. With less than that, even the smallest trade risks a bigger share of your account.

Does forex trading work differently in India, Kenya or South Africa?

The mechanics in this lesson (pairs, pips, lots, spread and margin) are the same everywhere. What changes is local regulation: which brokers are licensed, and in some countries which pairs or products residents are allowed to trade. Check your national regulator's rules and its register of licensed brokers before you deposit.

Can I lose more than I deposit?

Yes, it can happen. If the price gaps past your stop, for example over a weekend or on major news, your equity can fall below zero, and you may owe the broker the difference. Some regulators require brokers to offer negative balance protection, which stops a retail account from going below zero. Check whether your broker offers it before you deposit.

Do forex trades expire?

A spot or CFD position with a broker has no expiry date. It stays open until you close it, although positions held overnight usually pay or earn a small interest adjustment called a swap. Forex futures work differently: they are traded on an exchange and have a fixed settlement date, unlike a broker position.

Part of Forex basics: more guides, terms and free tools on this subject.