Skip to content
MT5MT4soonTradingViewsooncTradersoonNinjaTradersoonPythonsoon

Bid and Ask Rate Meaning: Which Price You Pay and Which You Get

beginner8 min readNov 16, 20260 views
Learn Forex from zero · lesson 55 of 130 · chapter 1

The bid is the price the market will pay you when you sell. The ask (also called the offer) is the price you pay when you buy. The ask is normally higher than the bid, and the gap between the two is called the spread. Put simply, you buy at the higher price, sell at the lower one, and the difference is what it costs you to trade.

This matters from your very first trade. It explains why a new trade opens slightly in the red, why a stop-loss can be hit when the chart never reached it, and why a currency exchange board seems to work backwards.

Bid and ask are quoted from the market's side, not yours

A quote comes from whoever is making the price: a dealer, a bank, a broker, or the crowd of other traders. The bid price is what they offer to pay to buy from you. The ask price is what they want to sell to you for. Many trading platforms drop the jargon and label the bid "Sell" and the ask "Buy", which describes what you do when you click.

The bid and ask rate of foreign currency at a bank counter or exchange booth works the same way. The board says "We buy" and "We sell". "We buy" is the bid: what you get when you hand over foreign notes. "We sell" is the ask: what you pay to get them. The counter always buys low and sells high, and the gap is how it earns money.

Currency exchange board: the 'We buy' rate is the bid you get, the 'We sell' rate is the ask you pay
Illustrative values. The board is written from the counter's side: 'We buy' is the lower price you get, 'We sell' is the higher price you pay, and the gap is what the counter earns.

In forex, the quote is for a currency pair such as EUR/USD. The price is how many US dollars one euro costs. Say EUR/USD is quoted at 1.1050 / 1.1052. The market will buy euros from you at 1.1050 dollars each and sell you euros at 1.1052 dollars each.

Which price you get when you open and close a trade

Every trade has two ends, and each end uses the opposite price. Opening a buy and closing it later are separate deals with the market.

What you doPrice you getButton on many platforms
Open a buy (go long)AskBuy
Close a buyBidSell
Open a sell (go short)BidSell
Close a sellAskBuy

Protective orders work the same way. A stop-loss or take-profit on a buy position triggers when the bid reaches it, because closing a buy means selling. On a sell position they trigger when the ask reaches them, because closing a sell means buying.

Each end of a trade uses the opposite price: buy trades open at the ask and close at the bid, sell trades open at the bi
The line your trade closes on is the line your stop-loss and take-profit watch: the bid for a buy, the ask for a sell.

How the spread becomes a cost on every trade

The spread is ask minus bid. In forex it is usually quoted in pips, and on most pairs one pip is 0.0001. In the same example quote, 1.1052 minus 1.1050 is 0.0002, a 2-pip spread. The price ladder below shows that quote with the gap shaded.

EUR/USD quote: bid 1.1050, ask 1.1052, a 2-pip spreadIllustration
Spread: 2 pipsAsk (you buy)1.1052Bid (you sell)1.1050

You buy at the ask, but your open position is valued at the price you could sell at, which is the bid. So a new buy shows a loss equal to the spread straight away. A new sell shows the same loss, mirrored. This is not a bad entry. It is the fee for trading, and it is income for the broker or market maker.

The size of the spread also tells you about the market. A tight spread usually means high liquidity, with many buyers and sellers. A wide spread usually means low liquidity, high volatility, or both. Depending on the broker, spreads are either fixed or variable, and variable spreads change with market conditions. The spread you saw an hour ago is not a promise for the next trade.

Worked example: one EUR/USD buy from entry to exit

The figures here are an illustrative example. Suppose you buy 10,000 euros while EUR/USD is quoted at 1.1050 / 1.1052.

  1. You buy at the ask, 1.1052.
  2. Your position is immediately valued at the bid, 1.1050. That is 2 pips lower. On 10,000 units, one pip is 10,000 × 0.0001 = $1, so the screen shows −$2.
  3. Later the quote moves to 1.1080 / 1.1082. You close by selling at the bid, 1.1080.
  4. Your gain is 1.1080 − 1.1052 = 0.0028, which is 28 pips, or $28.

The chart, which follows the bid, rose from 1.1050 to 1.1080. That is 30 pips. You made 28. The missing 2 pips is the spread you paid when you got in. The calculation below shows each step.

EUR/USD buy of 10,000 units: spread cost and final profit
Spread1.1052 − 1.1050= 0.0002
Spread in pips0.0002 ÷ 0.0001= 2 pips
Value of 1 pip on 10,000 units10,000 × 0.0001= $1
Loss on screen right after entry2 × $1= $2
Pips gained: exit bid minus entry ask(1.1080 − 1.1052) ÷ 0.0001= 28 pips
Profit in money28 × $1= $28
Result while the bid moved 30 pips+$28

You can reuse this rule on any trade. On a buy, your break-even is the ask you paid, so the bid has to climb by the full spread before you are back to zero. On a sell, the ask has to fall by the full spread.

Why your chart can hit your stop without touching it

Most forex charts are drawn from the bid price only, so the ask line is not on your chart. That is fine for buy positions, which close at the bid. It catches people out on sell positions, which close at the ask.

Using the same 2-pip spread, suppose you sell EUR/USD and place your stop-loss at 1.1070. The bid peaks at 1.1069, so the chart shows the price stopping one pip short of your stop. At that moment, though, the ask is 1.1071. Your sell closes at the ask, so the stop fills. The drawing below shows both lines.

Sell stop-loss triggered by the ask while the bid chart stays below it
The chart line misses the stop by one pip, but the ask, which closes sell trades, crosses it.

Pending buy orders run into the same gap. A buy limit at 1.1040 fills only when the ask reaches 1.1040. With a 2-pip spread, that happens when the bid is at 1.1038. If the chart dips to 1.1040 and turns back up, your order never fills. The chart below shows the fix: a buy limit at 1.1042 fills when the bid touches 1.1040.

EUR/USD bid chart dipping to 1.1040: a buy limit at the chart level vs a buy limit at the level plus the 2-pip spreadIllustration
Buy limit 1.1042 (level + spread1.1042Buy limit 1.1040 (chart level): 1.1040Bid 1.1040 = ask 1.1042
The bid's low is 1.1040, but at that moment the ask is 1.1042, so only the buy limit set at the chart level plus the spread fills (illustrative candles).

Fix: for a sell stop-loss, place it above the chart level plus the spread, and leave a little room on top. For a buy limit, set the order price equal to the chart level plus the spread, so it fills when the bid reaches that level. Stock charts are often drawn from the last traded price, which is neither the bid nor the ask. The same caution applies there.

Who sets the bid and ask price

On a stock exchange

On an exchange, the bid and ask price in the share market come from orders. Every buy order waiting at a price is a bid, and every sell order waiting at a price is an ask. The highest waiting buy order is the best bid. The lowest waiting sell order is the best ask. Those two are the prices you see quoted.

Say a share has the order book below. The best bid is 25.40 and the best ask is 25.42, so the spread is 0.02.

Stock order book with buy orders on the bid side and sell orders on the ask side
The best bid and best ask are the closest orders on each side; the gap between them is the spread.

A trade happens when someone accepts a waiting price. A buyer who wants in now pays the best ask, 25.42. A seller who wants out now gets the best bid, 25.40. Size matters too. In this order book, if you want 600 shares right away, only 400 are offered at 25.42, so the other 200 fill at 25.43.

With a specialist or designated market maker

On some exchanges, a designated market maker (once called a specialist) quotes both a bid and an ask for each stock. The "last" price on a stock quote is the most recent trade, not a price you can deal at now.

In forex

Forex has no central exchange. Large banks and liquidity providers quote each other in the interbank market. Your broker either passes those prices on, often with a markup, or sets its own as a market maker. That is why the same pair can have a different spread at different brokers, and why the spread changes during the day.

Mistakes that cost beginners money

Reading the quote from your own side

With two numbers on every quote, it is easy to grab the wrong one. Fix: before any exchange or trade, ask yourself "am I selling to them or buying from them?" and pick the matching side.

Picking targets the spread eats

To see how much of your target the spread takes, divide the spread by the target. The table below runs that division for one 2-pip spread against several target sizes.

Profit targetSpread ÷ targetShare taken by a 2-pip spread
5 pips2 ÷ 540%
10 pips2 ÷ 1020%
20 pips2 ÷ 2010%
50 pips2 ÷ 504%

Fix: run this division before every trade. If the spread takes a large share of the target, aim further or skip the trade.

Opening any trade or holding shorts while the spread is wide

Variable spreads widen when liquidity is thin or volatility jumps, such as around major news or during quiet hours. A trade opened then starts further behind. An open sell is valued at the ask, so if the spread widens while the bid stays where it is, your floating profit and loss gets worse and a tight stop can trigger. Fix: check the live spread right before you click, and wait if it is clearly wider than you normally see for that pair. If you hold short trades through news or quiet hours, give their stops room for a wider spread.

FAQ

Do I pay the spread twice, once to open and once to close?

No. You cross the spread once per round trip, not once at each end. If the spread is wider when you close than when you opened, that extra width costs you more.

Why do currency converters show one exchange rate when my platform shows two?

Converters and news sites often show the mid rate, which is halfway between the bid and the ask. It is useful as a reference, but you cannot trade at it. You always deal at the bid or the ask.

Can I buy or sell at a price between the bid and the ask?

On an exchange you can place a limit order inside the spread. Your order then becomes the new best bid or best ask, and it fills only if someone accepts it. With most retail forex brokers you trade at the broker's quoted bid and ask, so a limit order simply waits until that quote reaches your price.

Part of Forex basics: more guides, terms and free tools on this subject.