Types of Orders in the Forex Market: Market, Limit, Stop and Stop Limit
The types of orders in the forex market fall into two groups. A market order buys or sells right now at the current price. A pending order waits until price reaches a level you set. The pending types are Buy Limit, Sell Limit, Buy Stop, Sell Stop, Buy Stop Limit and Sell Stop Limit. Stop Loss and Take Profit attach to either kind and close the trade for you.
Picking the wrong one costs real money. Put a limit where a stop belongs and it either fills at a price you never wanted or never fills at all. A trade with no stop loss attached has no exit if the market turns against you.
Market orders: you get in now, at the Ask or the Bid
Every forex quote has two prices. The Bid price is what you can sell at. The Ask price is what you can buy at. The gap between them is the bid-ask spread.
A market order trades straight away at whatever price is live. A buy fills at the Ask and a sell fills at the Bid. You never pick the price. You just accept the current one.
Say EUR/USD shows a Bid of 1.10000 and an Ask of 1.10020. A pip is the fourth decimal on EUR/USD (0.0001), so 1.10000 to 1.10020 is 2 pips. A market buy fills at 1.10020. Your open trade is valued at the Bid, which is the price you could sell back at, so it starts 2 pips in the red. The chart below shows that gap.
Market orders are built for speed. In forex they fill almost instantly, but the fill price is not guaranteed. Slippage is when your fill differs from the price you saw. It is the main risk of a market order when the market is moving fast, for example around a big news release.
Use a market order when getting into the trade matters more to you than the exact price.
Pending orders: four basic types, sorted by two questions
A pending order is an instruction to trade later, once price meets a condition you set in advance. Until then nothing happens. There is no position and no profit or loss.
You can pick the right basic type by answering two questions:
- Buy or sell?
- Do you want a better price than now, or do you want price to prove itself first?
If you want a better price, use a limit order. A Buy Limit sits below the current price and buys at that level or lower. You expect a dip, then a rise. A Sell Limit sits above the current price and sells at that level or higher. You expect a rally, then a fall.
If you want proof first, use a stop order. A Buy Stop sits above the current price and buys at that level or higher. You expect the rise to carry on. A Sell Stop sits below the current price and sells at that level or lower. You expect the fall to carry on. The map below shows where each one sits.
Here is a rule you can remember. A limit order triggers when price moves your way: you buy cheaper or sell higher than now. A stop order needs price to push through your level, so you accept a worse price than now in exchange for confirmation.
One common misread: "Sell Stop" sounds like a stop loss, but it is an entry order. When it triggers, it usually opens a new short position. (Going long means buying and going short means selling.) It does not protect a trade you already have.
Stop limit orders: a breakout entry with a limit on your fill price
A plain Buy Stop buys at the level or higher. In a fast spike, "higher" can be a lot higher. A Buy Stop Limit gives you control over the fill price by splitting the order into two steps.
You set two prices: a stop price above the market and a limit price. When price reaches the stop, nothing goes to the market yet. Instead, a Buy Limit is placed at your limit price. Where that limit sits depends on which of two versions your platform uses.
The cap version. The limit sits at or above the stop. In an illustrative example, a Buy Stop Limit with a stop at 1.1050 and a limit at 1.1060 can only fill between 1.1050 and 1.1060. If price jumps straight past 1.1060, you get no fill unless price comes back into that range. This version fills during the breakout and caps the worst price you can pay.
The pullback version, which some platforms use (MetaTrader 5 among them). The limit sits below the stop. When the Ask reaches the stop price, a Buy Limit is placed at your limit price, and you only get filled if price breaks out and then pulls back to that level. The chart shows the pullback version only, not the cap example above. It uses a stop at 1.1050 and a limit at 1.1030.
A Sell Stop Limit is the mirror image. In the cap version, the stop sits below the market and the limit at or below the stop, so you sell only between those two prices. In the pullback version, when the Bid falls to the stop price, a Sell Limit is placed at a limit price above the stop price, and you sell only if price breaks down and then bounces back up to your level.
Check which version your order window means before you place one. The same two prices can give a breakout fill on one platform and a pullback fill on another.
The trade-off is plain. You get a better entry than a plain stop order, but in a strong move that never looks back you get no trade at all.
How long a pending order stays active
Most platforms let you choose how long a pending order lives. The usual choices are:
- Good Till Canceled (GTC): active until you delete it.
- Today: active for the current trading day only.
- Specified date: active until the date and time you enter.
If your idea depends on one session or one news release, give the order an end date. A setup from Tuesday's chart can be meaningless by next week, but a GTC order will still fire.
Stop Loss and Take Profit: exits you attach, not trades of their own
A Stop Loss closes your whole position if price moves against you to a level you choose. A Take Profit closes your whole position when price reaches a level in your favour. Neither one stands alone. Each must be attached to an open position or to a pending order.
Attach them to the pending order itself. Then your exit is in place the moment the order fills, even if you are asleep when it triggers.
A trailing stop moves your stop loss along automatically as price moves in your favour. On some popular platforms the trailing stop is run by the software on your own device, not by the broker's server. It stops working when you close the platform. Check how yours handles it before you rely on one overnight.
One thing that catches almost everyone: exits trigger on the price you would close at. Closing a long position means selling, so its stop loss and take profit trigger on the Bid. Closing a short position means buying, so they trigger on the Ask. Many charts plot only the Bid. That means a short's stop loss can be hit while the chart line never touched your level, because the Ask sits a spread higher.
Which order type fits your plan
| Order | Where you place it | When it fills | Your view |
|---|---|---|---|
| Market buy | No level, right now | Immediately, at the Ask | You want in now |
| Market sell | No level, right now | Immediately, at the Bid | You want out or short now |
| Buy Limit | Below current price | Price falls to your level | Dip, then rise |
| Sell Limit | Above current price | Price rises to your level | Rally, then fall |
| Buy Stop | Above current price | Price rises through your level | The rise continues |
| Sell Stop | Below current price | Price falls through your level | The fall continues |
| Buy Stop Limit | Stop above price; limit at or above the stop (cap) or below it (pullback) | Ask hits the stop, then price trades at the limit or better | Breakout with a capped fill, or breakout then retest |
| Sell Stop Limit | Stop below price; limit at or below the stop (cap) or above it (pullback) | Bid hits the stop, then price trades at the limit or better | Breakdown with a capped fill, or breakdown then retest |
If you cannot fill in the "Your view" column for a trade, you are not ready to choose an order type yet.
Worked example: a Buy Stop with a stop loss and take profit
The figures here are an illustrative example. EUR/USD is trading at 1.1040 near the end of the week, after its highs stalled at or just under 1.1040 several times. You think a break above that area would carry on, so you want a Buy Stop at 1.1050, a little above it.
The plan:
- Buy Stop at 1.1050, size 0.10 lots. In this example each pip is worth $1.
- Stop Loss at 1.1020, below the breakout area.
- Take Profit at 1.1110.
Before you place the order, work out the risk and the target from the 1.1050 entry, not from the current 1.1040.
Now follow the three ways it can play out:
- The Ask peaks at 1.1045 and falls back, so it never reaches 1.1050. The order never triggers. No trade, nothing lost.
- The order triggers and price climbs. The Bid reaches 1.1110 and the take profit closes the trade: +60 pips from the 1.1050 entry, or +$60.
- The order triggers and price reverses. The Bid falls to 1.1020 and the stop loss closes the trade: −30 pips from the 1.1050 entry, or −$30.
There is a fourth case most lessons skip: a gap. Say price closes Friday at 1.1040 and opens Monday at 1.1065. Your Buy Stop fills at about 1.1065, not 1.1050. The distance to your stop loss is now 1.1065 − 1.1020 = 0.0045, which is 45 pips, or $45 instead of $30. A stop order promises that it will trigger. It does not promise your price. The chart below shows the plan's three levels and that gap.
If you had expected a dip first instead of a breakout, the same plan would use a Buy Limit below the current 1.1040 with the stop loss further below. The order type follows your view, not the other way round.
Mistakes that cost beginners money, and a 20-second check
Sending market orders into news. Prices jump and spreads widen, so your fill can be far from the quote you saw. A stop order does not protect you here: in a news spike it can fill well past its level, just as the gap case above did. Only a limit order caps your price, and it may not fill at all. Fix: stay flat through the release, or use a limit order and accept that you may miss the trade.
- –Fills right away
- –Spreads widen in the spike
- –Fill can be far from the quote you saw
- –Triggers when price reaches your level
- –Can fill well past that level
- –Same risk as the weekend gap case
- –The only one that caps your price
- –May not fill at all
- –Use it only if missing the trade is acceptable
Mixing up limit and stop. Choosing Buy Limit when you meant Buy Stop gets you a dip entry when you wanted a breakout. Many platforms will reject it if it sits on the wrong side of price. Fix: say your view out loud ("dip then rise" or "break and continue") and check the table above.
Expecting a stop limit to always fill. In a clean breakout it often won't. Fix: use it only when missing the trade is acceptable to you.
Before you send any order, run through this check:
- Is a buy limit or sell stop below the price, and a sell limit or buy stop above it?
- Is a stop loss attached to the order itself, not planned for later?
- Do you know your risk in money, not just in pips?
- Have you allowed for the spread on both the entry and the exit trigger?
- Is the expiry set to match the idea, and is your pending list clear of old orders you no longer follow?
- If you use a trailing stop, is a normal stop loss also in place in case your platform closes?
- Is a big news release due before the order could trigger?
Practise each type on a demo account until you can predict what an order will do before you place it.
FAQ
Why did my broker send me a new price instead of filling my order?
That is a requote. Some brokers fill at the price you clicked only if the market hasn't moved beyond an allowed range. If it has, they reject the order and offer a new price. With other brokers the price is set at execution, and sending the order means you accept it in advance, slippage included.
Why did only part of my order fill?
The order's fill policy decides what happens when not enough volume is available at your price. With Immediate or Cancel, whatever volume is available right away fills and the rest is cancelled, so you can end up with a smaller position than you asked for. With Fill or Kill, the whole volume fills at once or nothing fills at all. Which policies you can use depends on your broker.
Can I change or cancel a pending order after placing it?
Yes. Until it triggers, you can usually move its price, stop loss, take profit and expiry, or delete it. Once it fills, it becomes an open position: you can close it, or move its stop loss and take profit.
Do I pay the spread on a pending order that never fills?
No. A pending order that never triggers opens no position, so there is no spread to pay and no profit or loss. The spread is paid only when the order fills.
What Does a Short Position Mean? How Selling First WorksNext lesson →
Bid and Ask Rate Meaning: Which Price You Pay and Which You Get
Part of Forex basics: more guides, terms and free tools on this subject.









