Skip to content
MT5MT4soonTradingViewsooncTradersoonNinjaTradersoonPythonsoon

How to Learn Forex Basics: What to Learn First, With the Maths Shown

beginner11 min readNov 12, 20260 views
Learn Forex from zero · lesson 32 of 130 · chapter 1

To learn forex basics, study them in the order a trade uses them. Start with what the forex market is. Then learn to read a currency pair quote, then bid, ask and the spread, then pips and lots, then leverage and margin, and finally order types. When you can work out the money at risk before you click, practise on a demo account (live prices, virtual money).

The order matters. If you don't know what a lot size or a leverage setting means in dollars, you can't know how much a trade can lose. Each step below closes one of those gaps.

What the forex market is and who trades it

Forex (foreign exchange) is the global market where one currency is swapped for another. It has no central exchange building. Banks, dealers, funds, companies and retail traders all trade with each other over a network. The biggest banks dealing directly with each other form what is called the interbank market.

It is a very large market. The Bank for International Settlements' 2025 survey found that the market traded about $9.6 trillion a day in April 2025.

Here is what that size means for you: one retail trader cannot move the price. Your job is to understand the price and control your own risk. You are not trying to outmuscle the market.

Exchange rates are driven mainly by expectations about interest rates, economic data releases and risk sentiment, meaning whether traders are reaching for safety or for risk. Scheduled news can move a pair many pips in seconds. That is why you check the economic calendar before you enter a trade.

Retail traders usually reach this market through a broker, often with a CFD: a contract that pays the change in the exchange rate without you owning the currency itself. The basics below apply however you reach it.

Step 1: Read a currency pair quote

Every forex price is a currency pair: two currencies and the exchange rate between them. The first currency is the base currency and the second is the quote currency. The price tells you how many units of the quote currency you need to buy one unit of the base currency.

Say EUR/USD is quoted at 1.1000. That means 1 euro costs 1.1000 US dollars. The figure below labels each part of that quote.

Anatomy of a EUR/USD quote at 1.1000
The price counts quote-currency units per one unit of the base currency.

Buying the pair (going long) means you buy the base currency and sell the quote currency. You profit if the price rises. Selling the pair (going short) is the reverse, and you profit if the price falls. You can sell first because you are trading the exchange rate, not a stack of euros sitting in a drawer.

Learn on major currency pairs first. These pair the US dollar with another large currency, as EUR/USD does. Most examples in this lesson use EUR/USD, so starting there lets you check each number as you read.

Step 2: Know the two prices, bid and ask, and the spread between them

At any moment your broker shows two prices. The bid price is what you receive when you sell. The ask price is what you pay when you buy. The ask is always the higher of the two, and the gap between them is the bid-ask spread.

The spread is a cost you pay on every trade. A buy opens at the ask but would close at the bid, so every new trade starts slightly in the red. For example, suppose EUR/USD shows the two prices below.

EUR/USD bid and ask prices with the spread shadedIllustration
Spread 0.00012Ask (you buy)1.10012Bid (you sell)1.10000

In this example the gap is 1.10012 − 1.10000 = 0.00012. If you buy here and close straight away with no price change, you lose that 0.00012 on every euro you traded. Step 3 turns that into dollars.

Step 3: Measure moves in pips and size trades in lots

A pip is the standard unit of price change. For most pairs it is the fourth decimal place, 0.0001 (the digit circled in the Step 1 figure). For pairs quoted in Japanese yen it is the second decimal place, 0.01. So if EUR/USD moves from 1.1000 to 1.1020, that is 20 pips. If USD/JPY moves from 150.00 to 150.50, that is 50 pips.

The 0.00012 spread in the Step 2 example is therefore 1.2 pips. The fifth decimal you see in a quote is a fraction of a pip, often called a pipette.

A lot is the size of your trade, counted in units of the base currency. A standard lot is 100,000 units, a mini lot is 10,000, a micro lot is 1,000 and a nano lot is 100.

Pips and lots together turn a price move into money. Pip value = units × pip size. On EUR/USD with a US-dollar account, one standard lot is 100,000 × 0.0001 = $10 per pip. The chart below shows how that shrinks by ten at each smaller lot size.

EUR/USD pip value by lot size for a US-dollar accountIllustration
Standard (100,000)
$10 / pip
Mini (10,000)
$1 / pip
Micro (1,000)
$0.10 / pip
Nano (100)
$0.01 / pip

These four values are worth memorising. A 20-pip move against you costs $200 on a standard lot and $2 on a micro lot. It is the same move on the same chart, with a hundredfold difference in money.

Those round dollar figures only apply when the US dollar is the quote currency and your account is in dollars. For other pairs, the pip value gets converted at the current exchange rate. For example, on USD/JPY one standard lot = 100,000 × 0.01 = ¥1,000 per pip. At 150.00 that is ¥1,000 ÷ 150 = about $6.67 per pip. Check the figure your order window or a pip calculator shows before you trade.

Now the spread from Step 2 has a price tag. On EUR/USD it costs 1.2 pips × $10 = $12 per standard lot, or 1.2 × $0.10 = $0.12 per micro lot, paid the moment you enter.

Step 4: Understand leverage and margin before you touch them

Leverage lets you control a position larger than your deposit. At 100:1, $1,000 controls a $100,000 position. Gains and losses are worked out on the full $100,000, not on your $1,000.

That is where the danger lies. At 100:1, a 1% move against you is 1% × $100,000 = $1,000. That wipes out your entire deposit.

A $100,000 position at 100:1 leverage shown as 100 squares of $1,000, with the $1,000 deposit as one square
At 100:1 your deposit is only one square of the position, but profit and loss are worked out on all 100. A 1% move is one square: $1,000, the whole deposit.

Margin is the part of your money the broker holds as collateral while a trade is open. It is not a fee. The money is set aside and comes back when the trade closes. A margin requirement is leverage written as a percentage: a 3% margin requirement is about 33:1 leverage. One standard lot of EUR/USD at 1.10 is a $110,000 position, so at 3% you must put up $110,000 × 3% = $3,300.

Your equity is your balance plus or minus any open profit or loss. Your margin level is equity ÷ used margin × 100%.

As an example, say your account has $6,600 of equity with that same standard lot open, tying up $3,300 of margin: $6,600 ÷ $3,300 × 100% = 200%. If the trade moves against you and equity falls to $4,950, the margin level drops to $4,950 ÷ $3,300 × 100% = 150%.

If losses push your margin level below the broker's threshold, you get a margin call. You must then add funds, or the broker may close your positions at whatever price is available.

One more rule: the leverage your broker offers is a ceiling, not a setting you have to use. What actually matters is your effective leverage: total position value ÷ equity. If your effective leverage climbs above what you planned, your position is too big, even if the broker would let you open it.

Step 5: Know which order you are sending

A market order buys or sells right now at the current available price. Your broker fills it at whatever price is available, without asking you to confirm again. In a fast market, your fill can differ from the price you last saw.

A pending order waits until the price reaches a level you set in advance. The four types are easy to confuse, and mixing them up opens trades you didn't intend.

OrderPlacedUse it when you expect price to...
Buy limitBelow the current priceDip to your level, then rise
Buy stopAbove the current priceBreak higher and keep going
Sell limitAbove the current priceRise to your level, then fall
Sell stopBelow the current priceBreak lower and keep going
Where the four pending orders sit relative to the current price: buy stop, buy limit, sell limit and sell stop
Limits sit on the side that gives a better price than now (buy below, sell above). Stops sit on the breakout side (buy above, sell below).

Here is a memory hook: a limit order gets you a better price than now, and a stop order gets you in on a breakout at a worse price. Separately, a stop-loss closes a trade at a price you choose to cap the loss, and a take-profit closes it at your target. Set both when you open the trade.

A worked example: one EUR/USD trade from plan to result

The figures here are an illustrative example. Suppose you have a $1,000 account and want to buy EUR/USD at an ask of 1.1000. You put the stop-loss at 1.0980 and the target at 1.1040. Your rule is to risk no more than 1% of the account on one trade. The chart below follows the trade from entry until price reaches the target.

EUR/USD buy at 1.1000 with a stop-loss at 1.0980, running up to the take-profit at 1.1040Illustration
Take-profit 1.1040 (+40 pips)1.1040Entry 1.10001.1000Stop-loss 1.0980 (−20 pips)1.0980Target hit: +40 pipsBuy
Illustrative price path. The stop sits 20 pips below the entry and the target 40 pips above it. Here price climbs to the target and the trade closes at +40 pips.

Start from the money at risk, because that is the one number you control: here 1% of $1,000. The stop distance then sets the lot size. The wider the stop, the smaller the trade has to be so that a stop-out still costs the same $10. The calculation below goes through each step so you can copy it.

Sizing a EUR/USD buy at 1.1000 with a 20-pip stop on a $1,000 account
Money at risk (1%)$1,000 × 1%= $10
Stop distance (20 pips)1.1000 − 1.0980= 0.0020
Pip value you can afford$10 ÷ 20= $0.50
Micro lots$0.50 ÷ $0.10= 5
Position value5,000 × 1.1000= $5,500
Margin at 3%$5,500 × 3%= $165
Order size5 micro lots (0.05 lots)

Now read the outcomes. If the stop is hit, you lose 20 × $0.50 = $10, which is 1% of the account. If the target is hit, you gain 40 pips (1.1040 − 1.1000) × $0.50 = $20. Your effective leverage is $5,500 ÷ $1,000 = 5.5:1, far below what most accounts allow.

Now add the spread. Suppose it is 1 pip in this example. Charts usually show the bid.

Your 20-pip stop is measured from the ask you paid, so the loss if it is hit is still $10, but the chart only has to fall 19 pips to reach it. The spread used up 1 of your 20 pips of room (5%) the moment you entered.

Tighten the stop to 5 pips and the same 1-pip spread uses up 1 of your 5 pips, or 20% of your room. Tight stops make the spread a much bigger share of every trade.

How much of a 20-pip stop and a 5-pip stop a 1-pip spread uses up
The spread is the same 1 pip in both cases. It uses 5% of a 20-pip stop's room but 20% of a 5-pip stop's room.

Check yourself before you use real money

You have learned the basics when you can answer all of these for a trade without looking anything up:

  • Which currency am I buying, and which am I selling?
  • What is the spread in pips right now?
  • What is the pip value of my trade size?
  • How much money do I lose if the stop is hit, and what percentage of my account is that?
  • How much margin will this trade tie up, and what is my effective leverage?
  • Which order type am I sending, and where will it fill?

If you can't answer even one of them, keep practising that kind of trade on a demo account, where mistakes cost nothing. While you learn, stick to one major pair and one or two timeframes, such as the 1-hour and 4-hour charts. That way the numbers stay familiar.

Three sizing mistakes that cost beginners money even when the maths is right

These mistakes can cost money even after you can answer every question in the checklist above.

Sizing from the leverage on offer instead of from your risk. In the same example, 100:1 leverage would let your $1,000 account open 5 mini lots of EUR/USD at 1.1000: a $55,000 position needing only $55,000 ÷ 100 = $550 of margin. With the same 20-pip stop, that puts 20 × $5 = $100 at risk, 10% of the account instead of 1%. Fix: size from your stop and your risk per trade first, then check that the effective leverage matches your plan.

Moving or removing the stop-loss. Widening a stop to avoid taking a loss raises the risk you calculated after the fact. Fix: if the trade idea is wrong, close it. Don't move the stop further away.

Holding a trade over the weekend without planning for a gap. Spot forex trades around the clock on weekdays and pauses at the weekend. Prices can open on Monday at a different level from where they closed on Friday, which is called a gap.

If price gaps past your stop-loss, the stop fills at the first available price, which can be worse than the level you set. The loss can then be bigger than you planned.

Fix: if you hold over the weekend, either close before Friday's close or cut the size so that a stop filled well beyond your level still costs no more than you can accept. The chart below shows a gap on a buy from the same 1.1000 entry with the same 1.0980 stop.

Weekend gap: EUR/USD opens Monday below a buy trade's 1.0980 stop-lossIllustration
Entry 1.10001.1000Stop-loss 1.09801.0980Friday closeMonday open: stop fills at 1
Illustrative values: Friday closes at 1.0995, above the 1.0980 stop. Monday opens at 1.0965, so the stop fills there, 15 pips worse than the level that was set.

In the example, Monday opens at 1.0965, a fill 15 pips worse than the 1.0980 stop. That makes it a 35-pip loss from the 1.1000 entry. At 5 micro lots, the planned $10 loss becomes 35 × $0.50 = $17.50.

FAQ

How long does it take to learn forex basics?

The ideas in this lesson can be learned in days. Applying them without mistakes takes longer. Here is a suggested routine, not a statistic: log 20–30 demo trades, and before entering each one, write down the money at risk, the pip value and the margin it ties up. When those numbers come out right without effort, the basics are in place.

What do I actually need to start: a broker, an app, or both?

Both, and they come together. You open an account with a regulated broker, and the broker gives you its trading platform as a desktop program or a phone app. Start on that platform's demo account. Move to a small live account only once you can answer every question in the checklist above without looking anything up. Whichever platform you get, it shows the same bid, ask, lot size and margin, so the maths in this lesson carries over.

I have savings ready to trade. Should I deposit all of it while I'm learning?

No. Learn on a demo account first, then fund only an amount you could lose without it hurting your life. Your account size doesn't decide your risk; your risk per trade does. Starting small with micro or nano lots lets you practise the exact same maths with real money at stake.

Part of Forex basics: more guides, terms and free tools on this subject.