What Is a Lot in Forex? Standard, Mini, Micro and Nano Lots Explained
A lot in forex is a fixed, standard amount of a currency pair that you buy or sell in one trade. A standard lot is 100,000 units of the base currency. A mini lot is 10,000 units, a micro lot is 1,000 and a nano lot is 100. You type your order size in lots, so 0.10 means one mini lot.
Lot size decides how much money each pip of price movement is worth to you. If you get it wrong by one decimal place, the same trade can lose ten times what you planned.
How many units are in each lot size
When you trade forex, you always trade a currency pair, such as EUR/USD. The first currency in the pair is the base currency, and lots count units of that currency. One standard lot of EUR/USD is 100,000 euros.
Your trading platform writes size as a decimal of one standard lot. That is why the lot names and the numbers in the order window look different. The table puts them side by side.
| Lot name | Units of base currency | Volume you type | Pip value on EUR/USD |
|---|---|---|---|
| Standard | 100,000 | 1.00 | $10 |
| Mini | 10,000 | 0.10 | $1 |
| Micro | 1,000 | 0.01 | $0.10 |
| Nano | 100 | 0.001 | $0.01 |
Each row is ten times smaller than the one above it. So 0.50 lot is 50,000 units, and 0.03 lot is three micro lots, or 3,000 units.
These names are a convention, not a rule. Some brokers don't use fixed lots at all and let you choose a size in units instead. Whatever the names, your broker's own volume rules decide what size you can actually trade.
How lot size turns pips into money
A pip is the standard small step in a price. On EUR/USD it is the fourth decimal place (0.0001). A pip has no money value until you attach a lot size to it.
When the US dollar is the quote currency, as in EUR/USD or GBP/USD, these pip values are fixed (see the table above). A 50-pip move on 1.00 lot of EUR/USD is therefore $10 × 50 = $500, as either a profit or a loss depending on the direction.
When the dollar is the first currency, as in USD/JPY, you earn the pip in yen and then convert it to dollars. At a USD/JPY rate of 145.00, one pip on a standard lot is 1,000 yen, or about $6.90. When the rate moves, that dollar value moves with it.
As an example, the chart below shows one losing trade on EUR/USD: the price moves 25 pips against you and hits your stop. The trade is the same at all five sizes. Only the lot size changes, and the loss runs from $2.50 to $250.
Margin is not the same as your lot size
One standard lot of USD/JPY is 100,000 US dollars, so it controls a position worth $100,000. You don't need that much money in your account. Leverage lets you control a position bigger than your deposit. With leverage, you put up a deposit called margin, and the broker lets you control the full position.
As an illustrative example, take leverage of 30:1. This is only one possible setting, not a figure every account uses. At 30:1, margin is about 3.33% of the position's value. For a standard lot of USD/JPY, worth $100,000, that is $100,000 ÷ 30, roughly $3,330. A 0.20 lot needs one fifth of that: $20,000 ÷ 30, about $667.
Margin is the money set aside while the trade is open. It is not a limit on what you can lose. Your profit or loss is lot size × pips moved, and leverage makes losses bigger in the same way it makes gains bigger.
Worked example: picking a lot size from your risk
A common method works backwards from the money you are willing to lose. Choose a risk per trade and place your stop-loss. Then pick the lot size that makes a stop-out cost exactly that amount.
The figures here are an illustrative example. Say your account is $5,000, you risk 1% per trade, and your stop-loss on EUR/USD is 25 pips from your entry. One standard lot pays $10 per pip.
- Risk in money: $5,000 × 1% = $50.
- Loss on one standard lot if the stop is hit: 25 pips × $10 = $250.
- Lot size: $50 ÷ $250 = 0.20 lots.
- Check: 0.20 × $250 = $50. Hitting the stop costs exactly what you planned.
Notice the order: the stop comes first and the lot size comes last. In the same example with a 50-pip stop, the size becomes $50 ÷ (50 × $10) = 0.10 lots. The stop is wider and the lot is smaller, but the money at risk is still $50.
Rounding your lot size to what the broker accepts
Every symbol has three volume limits: a minimum volume, a maximum volume and a volume step. The step is the smallest change you can make to the size. For example, a forex pair might have a minimum and a step of 0.01 lot, which is one micro lot, while an index might use 0.1 for both. A broker can also set a minimum that differs from the step: a minimum of 0.1 with a step of 0.01 allows 0.10, 0.11, 0.12 and so on.
Your formula will rarely give you a round number. Use these rules:
- Too many decimals: round down to the step. Rounding up adds risk you didn't plan for.
- Below the minimum after rounding: skip the trade. Don't raise the size to reach the minimum.
- Above the maximum: cap the size at the maximum.
If the size breaks any of these limits, the platform rejects the order with an invalid volume error.
Using the same $5,000 account and $50 risk, suppose the stop is 30 pips. $50 ÷ (30 × $10) = 0.1667 lots. Round it down to 0.16, which risks 0.16 × $10 × 30 = $48.
Now suppose a $500 account risking 1%, with the same 30-pip stop. $5 ÷ (30 × $10) = 0.0167 lots. On a pair with a 0.01 minimum, you round down to 0.01 and risk $3. On a symbol with a 0.10 minimum, the size is far below the minimum, so the right choice is not to take the trade. The drawing below shows both cases on a symbol with a 0.10 minimum and a 0.01 step.
Lot size mistakes that cost beginners money
Typing 1 when you meant 0.1. A volume of 1.00 is a standard lot, not one dollar or one unit. On EUR/USD that is $10 a pip instead of $1. Read the volume field back to yourself before you confirm, and practise on a demo account until the decimals feel natural.
Assuming every pair pays $10 a pip. That is only true when the dollar is the quote currency and your account is in dollars. On USD/JPY at 145.00, a pip on a standard lot is about $6.90, and on a pair without the dollar, such as EUR/GBP, the value changes with the exchange rate. Work out the pip value for each pair before you size the trade.
Assuming 1.00 lot means 100,000 units on every symbol. Each symbol has its own contract size, which is the amount that 1.00 lot stands for, and it can differ between instruments. Metals, indices and other CFDs may not follow the forex 100,000-unit rule. Before you trade a new symbol, look up its contract size, minimum, step and maximum in the symbol's specification.
FAQ
Does a bigger lot size make the spread cost more?
Yes, in money. The bid-ask spread is the gap in pips between the bid price and the ask price, and you pay it on every trade. The number of pips stays the same at any size, but each pip is worth more on a bigger lot. If the spread on EUR/USD is, say, 1 pip, it costs $10 on 1.00 lot and $0.10 on 0.01 lot.
Can I change the lot size of a trade that is already open?
You can't edit the volume of an open position. To make it smaller, close part of it, if your platform allows partial closes; the part you close and the part you keep must both follow the symbol's minimum and step. To make it bigger, open a new order. Calculate its risk separately, because your total loss at the stop now includes both positions.
How Forex Trading Works: Pairs, Pips, Lots and One Full Trade ExplainedNext lesson →
Bid v Ask Price Explained: Where You Buy, Where You Sell, What It Costs
Part of Forex basics: more guides, terms and free tools on this subject.









