Skip to content
MT5MT4soonTradingViewsooncTradersoonNinjaTradersoonPythonsoon
Expert Advisors & automation

Trailing stop order

Also called trailing stop, trailing stop loss, trailing stop-loss order, trail stop, TSL

A trailing stop order is a stop loss that follows price at a set distance when the trade moves in your favour and stays still when price moves against you. If price reverses by that distance, the trade closes.

A fixed stop only limits the loss. A trailing stop also decides how much of an open profit you give back before you are out, so the distance you pick is the real decision.

What the trailing distance does to a buy trade

The trailing distance is the gap the order keeps between the best price reached and your stop. On a buy trade the stop sits below price and can only move up. On a pullback it does not move back down.

The figures below are an illustrative example. You buy EUR/USD at 1.1000 with a 30-pip trailing distance and a 0.10 lot (10,000 units, $1 per pip).

  1. The stop starts at 1.0970.
  2. Price climbs to 1.1020, and the stop follows to 1.0990.
  3. Price dips to 1.1010. The stop stays at 1.0990.
  4. Price reaches 1.1045, dips to 1.1035, then runs to 1.1080. The stop follows to 1.1015, holds there on the dip, then rises to 1.1050.
  5. Price falls back to 1.1050 and the trade closes there.

The drawing below shows the stop rising with each new high and going flat on each pullback.

Trailing stop order following a buy trade 30 pips below the highest price
The stop rises only when price makes a new high. It never steps down.

Working out what the stop has locked in

You can redo this for any trade: pips locked in = best move in your favour minus the trailing distance.

Trailing stop order maths for a 30-pip trail on a 0.10 lot buy
Starting stop price1.1000 - 0.0030= 1.0970
Stop price after the 1.1080 high1.1080 - 0.0030= 1.1050
Pips locked in (best move minus trail)80 - 30= 50
Result in money at $1 per pip50 × $1= $50
Trade closed at 1.1050+50 pips, $50

The same formula shows a common misread. Until price has moved the full trailing distance in your favour, the result is negative, so the stop still sits on the losing side of your entry. Here the trade is only protected from a loss once price passes 1.1030.

Where a 30-pip trailing stop sits relative to a 1.1000 buy entry as price risesIllustration
Stop still on the losing sidePrice reaches 1.1030 (+30 pips)1.1030Entry 1.1000 = stop once price hits 1.101.1000Stop after a 1.1020 high (−10 pips)1.0990Starting stop 1.0970 (−30 pips)1.0970
The stop stays below the 1.1000 entry until price has moved the full 30 pips, to 1.1030. Only then does it reach break-even.

How a tight or wide trail changes your result

The illustrative example below runs the same price path from the first figure with a 15-pip, a 30-pip and a 50-pip trail. It uses the same 0.10 lot at $1 per pip. So that the widest trail can finish, the example assumes price keeps falling after 1.1050, down to 1.1030.

TrailStarting stopStop at 1.1020 highAt 1.1045 highAt 1.1080 highExitResult
15 pips1.09851.10051.10301.10651.1065+65 pips, $65
30 pips1.09701.09901.10151.10501.1050+50 pips, $50
50 pips1.09501.09701.09951.10301.1030+30 pips, $30

With all three trails, the dips to 1.1010 and 1.1035 stay above the stop, so none of them closes early.

The starting risk also grows with the trail: 15, 30 and 50 pips, or $15, $30 and $50 at this size.

Pips locked in by a 15-pip, 30-pip and 50-pip trailing stop on the same illustrative buyIllustration
15-pip trail, exit 1.1065
65 pips
30-pip trail, exit 1.1050
50 pips
50-pip trail, exit 1.1030
30 pips
Illustrative values. The tight trail kept the most here only because every pullback in this path was 10 pips.

The result flips when a pullback is deeper than the trail. If the dip after the 1.1045 high had gone 20 pips, to 1.1025, the 15-pip trail would have closed at 1.1030 for +30 pips. The 30-pip and 50-pip trails, at 1.1015 and 1.0995, would have stayed in for the run to 1.1080. The right distance comes from how far price normally pulls back, not from the trail that would have looked best afterwards.

Trailing stop, fixed stop or trailing stop limit

A limit order only fills at your price or better; here the limit price sits a set offset from the trailing stop, so it trails too.

OrderWhat movesWhat happens at the triggerMain risk
Fixed stop lossNothingCloses at the next available priceGives back all open profit; gaps jump past the stop, so the fill is worse
Trailing stopStop price follows the best priceCloses at the next available priceNormal pullbacks close the trade early; gaps jump past the stop, so the fill is worse
Trailing stop limitStop price follows the best pricePlaces a limit order a set offset beyond the stop priceMay not fill in a fast move, leaving the trade open

A trailing stop limit trades certainty of exit for control of price. If getting out matters more than the exact price, use the plain trailing stop.

Where you set a trailing stop on your trading platform

Check where the trailing logic runs. On some platforms the broker's server moves the stop, so it works when you are logged off. On others your own device moves it, and it stops trailing the moment the platform closes or loses connection; the same applies to any trading robot that trails for you. The last stop price usually stays in place, but it no longer follows.

You set the trail as an order type or on an open position, in pips, points, a price amount or a percentage.

Trailing stop run on your device freezes when the platform closes, while a server-side stop keeps trailing
Illustrative values. After the platform closes, the last stop price stays in place but no longer follows price up.

Checks before you rely on a trailing stop

  • Measure the pullbacks on your timeframe. Mark the last 5 pullbacks on the timeframe you trade, take the biggest one in pips, add a small buffer for the spread, and use that as your trailing distance. If that distance makes your starting-stop risk too big for your account, trade a smaller size (see the next point) rather than tightening the trail.
  • Size the trade on the starting stop. Your risk is the first stop distance times pip value, exactly as with a fixed stop.
  • Know the trigger price. A buy closes on the bid, the price most charts draw. A sell closes on the ask, which sits above the chart price by the spread, so a widening spread can hit a sell trade's trailing stop even though the chart never reached it.
  • Expect slippage in gaps. Once triggered, the stop becomes a market order. After news or a weekend gap, the fill can be worse than the stop price.
  • Read the activation rule. Some platforms start trailing at once. Others wait until the trade is in profit by the trailing distance.
  • Check the minimum distance. Brokers often refuse a stop placed too close to the current price.

FAQ

How does a trailing stop work on a sell trade?

Everything is mirrored. The stop sits above price and moves down as price falls. It never moves back up, and the trade closes if price rises by the trailing distance from its lowest point.

What is a trailing stop order in stocks?

It works the same way, but the distance is usually set as a percentage or a money amount per share instead of pips. A 5% trail on a share that peaks at $100 puts the stop at $95. If you pick a percentage, the gap in money widens as the share price rises. If you pick a money amount per share, the gap stays the same, so it becomes tighter relative to price as the share climbs.

Should I use a trailing stop and a take profit together?

It depends on whether you have a target. If you see a clear level where you expect the move to end, set the take profit there and let the trailing stop protect the trade on the way. If you want to stay in a trend for as long as it lasts, leave the take profit off and let the trailing stop decide the exit.

Related terms