Breaker block
Also called Breaker, ICT breaker block, Bullish breaker, Bearish breaker
A breaker block is an order block (the last candle before a sharp move) that fails. In a bullish breaker, price sweeps below an earlier low, then closes above the zone; a bearish breaker is the mirror image. The zone then flips role: old supply becomes support, old demand becomes resistance.
This matters because a trader who still treats the broken zone in its old role ends up selling into support or buying into resistance. Once you spot the flip, you know which side of the zone the next trade belongs on and where to put your stop.
How a breaker block forms, step by step
A bullish breaker starts as a failed bearish order block. A bearish order block is the last up-close candle before a sharp drop. It marks a zone where sellers stepped in.
- Price rallies, prints that up-close candle, then falls hard.
- The drop goes below the most recent swing low before the order block and triggers the stop orders resting there. This is a liquidity sweep.
- Price turns and a candle closes above the top of the old order block.
- The zone that once held sellers is now a bullish breaker. You look to buy when price comes back to it.
A bearish breaker works the other way round. It starts as a failed bullish order block, the last down-close candle before a sharp rally, where buyers stepped in. Price rallies above the most recent swing high before that order block and triggers the stop orders resting there. Price then turns and a candle closes below the bottom of the old order block. The zone that once held buyers is now a bearish breaker, and you look to sell when price comes back up to it. The drawing below shows the bullish case, numbered like the steps above.
Breaker block vs order block vs mitigation block
In ICT trading (Inner Circle Trader, a popular price-action method that uses these terms), these three get mixed up all the time. What separates them is what happened to the zone, and whether a sweep came before the break.
| Order block | Breaker block | Mitigation block | |
|---|---|---|---|
| Zone status | Still intact | Broken by a candle close | Broken by a candle close |
| Sweep before the break | Not needed | Yes, a new extreme beyond the earlier swing | No, price failed to make a new extreme |
| Role when price returns | Same as before | Flipped | Flipped |
Decision rule: for a bullish setup, if the drop before the break did not make a new low, you are looking at a mitigation block, not a breaker. Many traders treat a mitigation block as the weaker of the two, because no stops were taken before the break, so fewer orders sit behind the move.
The drawing below puts the two side by side. The only difference is where the drop ends compared with the earlier low.
Marking breaker blocks on your charts
Breaker blocks are not a standard built-in indicator. Most traders draw them by hand with the rectangle tool on their trading platform. Draw a box over the failed order-block candle, then extend it to the right. The box can cover the candle body only (open to close) or the full wick (low to high). Pick one method and use it for every zone, so your entries and stops stay consistent. The choice changes the trade. With the illustrative numbers from the worked example below, a full-wick zone gives an entry at 1.1030, a stop at 1.1005, 25 pips of risk and 0.40 lots. A body-only zone gives an entry at 1.1026, the same stop, 21 pips of risk and about 0.48 lots. Body-only gets you a tighter stop and a bigger position for the same $100 risk, but price has to come 4 pips deeper to fill your order, so a retest that turns early leaves you out of the trade.
Many day traders mark the zone on the 1-hour or 4-hour chart, then time the entry on the 5-minute or 15-minute chart.
Checks before you trade a breaker block
- Sweep: price made a new high or low beyond the earlier swing. Coming close to it does not count.
- Break: a candle closed beyond the zone. A wick poking through does not count.
- Displacement: the break came on strong, wide candles. If price drifted through the zone on many small candles, treat the zone as weak.
- First retest: the first return to the zone is the one most traders take. The common reasoning is that each later touch uses up more of the orders that made it hold.
- Higher-timeframe direction: a bullish breaker inside a falling daily trend is a countertrend trade. Size it smaller or skip it.
- Stop and size: place the stop beyond the far side of the zone, then work out your lot size from that distance, not the other way round.
- News: check the economic calendar. A major release can push straight through any zone.
Trading a breaker block retest: a worked example
The numbers here are an illustrative example on EUR/USD with a $10,000 account.
- The bearish order block is an up-close candle with a low of 1.1010 and a high of 1.1030. This example uses the full-wick method, so the zone is 1.1010 to 1.1030. A body-only zone would be 1.1010 to 1.1026.
- Sweep: price drops to 1.0955, below the earlier low at 1.0970. Check passed.
- Break: a candle closes at 1.1042, above the zone's top at 1.1030. Check passed. The order block has failed and is now a bullish breaker.
- Displacement: that breakout candle is the widest on the chart, a 34-pip range from 1.1012 to 1.1046. Check passed.
- First retest: price has not been back in the zone since the break. You place a buy limit at the top of the zone, 1.1030. Price trades back down and fills it on its first return. The lowest price the retest reaches is 1.1022, still inside the zone.
- Your stop goes 5 pips below the zone, at 1.1005.
- Target: aim for the next swing high or obvious liquidity above, such as the buy stops resting over an old high. If that level gives less than twice your risk, skip the trade. In this example, assume the 4-hour chart shows an older swing high at 1.1080. That is 50 pips above entry against 25 pips of risk, so the trade passes the rule. The 1.1055 high printed just after the break is closer and may slow price on the way up.
The chart below shows the whole sequence, from the sweep to the retest.
You are risking 25 pips. Size the position so that those 25 pips cost 1% of the account. On EUR/USD, one standard lot (100,000 units) is worth $10 per pip.
The target is 50 pips away, so the possible reward is twice the risk. If price trades down to 1.1005 instead, the stop closes the trade for a $100 loss, and the breaker has failed as well.
FAQ
What happens if price closes back through a breaker block?
The setup is void. For a bullish breaker, a candle close below the zone's low cancels the idea. If your stop has not been hit yet, close the trade manually, and do not re-enter on the same zone.
Can I use breaker blocks on gold, indices or crypto?
Yes. The idea comes from price structure, so you can mark it on any liquid chart. Check that the zone's width fits your risk per trade, because zones on volatile markets can be much wider than on a major currency pair.









