Skip to content
MT5MT4soonTradingViewsooncTradersoonNinjaTradersoonPythonsoon

What Is Bull Bear Power? How to Read Elder's Bull and Bear Power

beginner8 min readNov 8, 20262 views
Learn Forex from zero · lesson 23 of 130 · chapter 1

Bull Bear Power measures how far buyers and sellers pushed price away from a 13-period exponential moving average. Bull Power is the bar's high minus that average. Bear Power is the bar's low minus it. Add the two together and you get one line, the combined Bull Bear Power. TradingView also labels this combined line the Elder-Ray Index. Above zero, bulls are stronger. Below zero, bears are stronger.

Why does this matter to you? It shows which side really controlled each bar. It helps you avoid buying while sellers still have the upper hand, and spot when a pullback inside a trend is running out of sellers.

The moving average is the price both sides agree on

An exponential moving average (EMA) averages recent closing prices and gives more weight to the latest bars. Alexander Elder, who created the indicator, treated this line as the market's consensus. It is the price where buyers and sellers currently agree on value.

Each bar then shows how far each side got away from that consensus. The bar's high is the furthest the buyers managed to push before they ran out of strength. The bar's low is the furthest the sellers managed to push. Bull Bear Power measures those two distances.

The standard setting is a 13-period EMA, and most charts use 13 as the default. A period is one bar on whatever timeframe you are viewing. That means 13 hours on a 1-hour chart and 13 days on a daily chart.

Bull Power and Bear Power: two distances from the same line

Bull Power = High − EMA. It is positive when buyers pushed the high above the average. It is negative when even the bar's high stayed below the average.

Bear Power = Low − EMA. It is negative when sellers pushed the low below the average. It is positive when even the bar's low stayed above the average.

That second rule trips up many beginners. When Bear Power goes above zero, the bears did not get stronger. It means sellers could not push price down to the average at all. In a downtrend Bear Power usually sits below zero. When prices climb and the lows lift above the EMA, it rises above zero.

Where the EMA sits relative to the bar tells you the balance of power. The drawing below shows the three possible cases. When both the high and the low are above a rising EMA, bulls dominate. When both are below it, bears dominate. When the EMA cuts through the bar, the two sides are fighting for control, and the slope of the EMA decides what that means, as the worked example below shows.

Three bars against a 13 EMA: bulls dominate, tug of war (check the EMA slope), bears dominate
Bull Power (green) and Bear Power (red) are always measured from the EMA. Their signs show who held control. When the EMA cuts through the bar, the EMA's slope decides how to read it.

Worked example: calculating Bull Bear Power by hand

The figures here are an illustrative example on a currency pair quoted to four decimals, such as EUR/USD, where 0.0001 is one pip. Suppose the 13-period EMA is at 1.1000 and the latest bar has a high of 1.1030 and a low of 1.0990.

Bull Power, Bear Power and the combined value for one bar
Bull Power (High − EMA)1.1030 - 1.1000= 0.0030
Bear Power (Low − EMA)1.0990 - 1.1000= -0.0010
Bull Bear Power (sum)0.0030 + (-0.0010)= 0.0020
Check: midpoint method((1.1030 + 1.0990) ÷ 2 - 1.1000) × 2= 0.0020
Bull Bear Power+0.0020 (20 pips)

Buyers got 30 pips above the consensus, while sellers got only 10 pips below it. The combined reading is +20 pips, so on this bar the bulls were stronger.

The last line of the calculation is a shortcut you can reuse. The combined value always equals twice the distance between the bar's midpoint and the EMA. Here the midpoint is (1.1030 + 1.0990) ÷ 2 = 1.1010, and (1.1010 − 1.1000) × 2 = 0.0020. So a positive combined reading only tells you that the middle of the bar sat above the average.

Now look at the same example again. The EMA at 1.1000 lies inside the bar, between 1.0990 and 1.1030. The combined line says the bulls were stronger, but sellers did push price below the average. That makes this a tug-of-war bar, not a clearly bullish one, so the combined number alone does not tell you what to do. The slope of the EMA does. Against a flat EMA, a tug-of-war bar gives no edge, so stand aside. Against a rising EMA, it is the pullback you want, and it becomes a buy setup when Bear Power turns up on the next closed bar. In this illustrative example, assume the EMA at 1.1000 has been rising over the last several bars, so this bar counts as that pullback rather than a reason to stand aside.

Worked example bar: the 13 EMA at 1.1000 sits inside the bar between the 1.0990 low and the 1.1030 highIllustration
Bar range: EMA inside = tug of warHigh 1.1030 (Bull Power +30 pips)1.1030Bar midpoint 1.10101.101013 EMA 1.1000 (consensus)1.1000Low 1.0990 (Bear Power −10 pips)1.0990
The EMA lies inside the bar's range, so buyers got 30 pips above it and sellers got 10 pips below it. Even though the combined reading is +20 pips, this is a tug-of-war bar.

Two lines or one: separate readings versus the combined value

You may see the same idea drawn in two ways. Elder's original Elder-Ray method reads Bull Power and Bear Power as two separate values, with the EMA as the trend filter. The single combined line is a later convenience version. The maths does not change, and the further any of these values is from zero, the stronger the side in control appears to be.

Bull PowerBear PowerBull Bear Power (combined)
FormulaHigh − EMALow − EMABull Power + Bear Power
Question it answersCould buyers lift price above value?Could sellers push price below value?Which side was stronger overall?
Above zero meansBuyers got above the averageEven the low stayed above the averageBulls stronger
Below zero meansEven the high stayed below the averageSellers got below the averageBears stronger
How it is shownIts own window under the chartIts own window under the chartOne line in one window
The same six bars shown as two separate Bull Power and Bear Power windows and as one combined Bull Bear Power line
Illustrative values. Same maths, two layouts: each reading in its own window, or one combined line that adds them for each bar.

How to read a buy or sell setup

If your chart shows only the combined line, it cannot tell you whether the dip went below the average, because a bar like the worked example still reads positive. For entries, switch on Bull Power and Bear Power separately, or check the bar's low against the EMA yourself.

The indicator was designed to work with a trend filter, usually a moving average. The simplest trend filter is the EMA itself, so the standard rules look like this:

  • Buy setup: the trend is up (the EMA is rising) and Bear Power is below zero but rising.
  • Sell setup: the trend is down (the EMA is falling) and Bull Power is above zero but falling.

Here is the logic. In an uptrend you want to buy after sellers have made their attempt and are failing. Bear Power below zero confirms the dip took price under the average. Bear Power rising tells you the sellers are losing strength. You end up buying weakness inside a strong trend instead of chasing a bar that is already far above value.

The chart below shows an illustrative example. Price climbs, then pulls back for a few bars while the EMA keeps edging higher. Bear Power falls to zero, dips to −5, then turns up to −3 on the next closed bar. That turn is the buy setup.

Buy setup: Bear Power dips below zero in an uptrend, then turns upIllustration
Bear Power (13), in pipsZero lineBelow zeroTurns up

A divergence makes the setup stronger: price makes a lower low during the pullback while Bear Power makes a higher low. For sell setups, price makes a higher high while Bull Power makes a lower high. The example chart above has a single dip, so it shows a setup without divergence.

Run this checklist before going long:

  1. Is the EMA rising over the last several bars? If it is flat or falling, there is no buy.
  2. Is Bear Power below zero? If it is above zero, buying now means chasing, so wait for a dip.
  3. Is Bear Power on the last closed bar higher than on the bar before it? If not, wait another bar.
  4. Is there a bullish divergence? You don't need one, but it adds weight to the setup.
  5. Where does your stop go, beyond the pullback low, and does the position size fit your risk? Decide both before you enter.

For going short, flip every line: the EMA is falling, and Bull Power is above zero but falling. Practise the checklist on a demo account until you can spot setups without second-guessing them.

Mistakes that cost beginners money

Buying because the combined line is positive. In a strong trend, a high positive reading often means price is already well above the average, so buying there means buying late. If the combined line is positive but Bear Power is also above zero, price is already above value and you are chasing, so wait for a dip that takes Bear Power below zero.

Chasing vs buying the dip: Bear Power above zero against a rising 13 EMA compared with Bear Power below zero
Illustrative drawing. A positive combined line is not enough. Wait for a bar whose low dips under the rising EMA, which puts Bear Power below zero.

Trading against the EMA's slope. A rising Bear Power in a downtrend is usually just sellers taking a pause. Check which way the EMA slopes before you read anything else.

Comparing readings across pairs or timeframes. The value is in price units, not on a fixed 0–100 scale. For example, a reading of 0.0020 on EUR/USD and 0.20 on a yen pair are both about 20 pips, even though the raw numbers differ a hundredfold. Daily bars also produce larger readings than 1-hour bars. Only compare a reading with the recent history of the same chart.

A 0.0020 reading on EUR/USD and a 0.20 reading on a yen pair are both about 20 pipsIllustration
EUR/USD reading 0.0020
≈ 20 pips
Yen pair reading 0.20
≈ 20 pips

Scale zoomed in to show the difference (bars do not start at zero).

Acting on a bar that has not closed. The high, the low and the EMA all keep moving until the bar closes, so the current value can flip from negative to positive. Judge setups on closed bars only.

Forgetting the lag. The indicator is built on a moving average, so it reacts after price has moved. In a sideways market the EMA goes flat and the readings flip back and forth around zero. If the EMA is flat, stand aside. In a clear trend, the same lag is what helps the indicator filter out poor signals.

FAQ

Can I use Bull Bear Power on gold, indices or crypto?

Yes. The Elder-Ray method, introduced by Alexander Elder in 1989, can be applied to any market, because the formula only needs each bar's high, low and close.

Which timeframe should I use it on?

Slower charts such as the 4-hour or daily give fewer but steadier readings. Faster charts give more readings with more noise. Use the timeframe that matches how long you plan to hold the trade.

Should I change the 13-period setting?

Thirteen is the standard default. A shorter EMA reacts faster but flips around zero more often. A longer one is smoother but signals later. If you test a different setting, change only that one thing and compare the results on the same chart.

Part of Forex basics: more guides, terms and free tools on this subject.